Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sierra tranfer issues

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

sierra tranfer issues

Post by thehanko »

hey peoples.

the car:
lwb ute with corrolla 1.6 and sprinter 5 speed into sierra 1.3 drivetrain.
its new to a mate and we have little background.

it was poping out of low range into neutral occasionally when 4wding prior to this.

The issue:
he cam home one day poped it into 4H to drive up onto my lawn in the wet. put it back into 2wd when parked.

Next day came out to drive it and no drive at all - and the range selector lever is jammed.

we have drive into the transfere case, but nothing out of the transfer case, seems the front output shaft seal has given way and leaked oil very recently. so im guessing something has seized but cant work out why it seized when not in use??? and why in a neutral/fasle neutral?

would it just be its cooled down and locked up?

sourcing a new tranfer for it, but just trying to understand whats happened to learn from it.

any ideas would be great.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 46
Joined: Thu Feb 19, 2009 6:08 am
Location: brisbane

Post by boost=money »

pull the transfer leaver out and u will fined the bush under there is gone replace it think mine cost $27. i had the same thing last week no bush left. hope this helps
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

boost=money wrote:pull the transfer leaver out and u will fined the bush under there is gone replace it think mine cost $27. i had the same thing last week no bush left. hope this helps
so you dont think its a major issue? is it a transfere out job to replace? or do you do it in the vehicle?

cheers
Ben
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 696
Joined: Mon Jan 10, 2005 7:07 pm
Location: Greenbank

Post by zookimal »

Can be done with transfer still in the car.

The bush (or sheet) breaks down, allowing enough play for the shifter to come out of the selector rods in the front of the case. Last one I got was $14 from Suzuki a few years back.

The leak is a seperate issue.
-Mal

Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Rebuild it dude, don't worry too much about getting a new one. They're about as mechanically simple as you're going to get.


http://locktup4x4.com.au/suzuki-89/driv ... t-393.html
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 39
Joined: Tue Mar 17, 2009 6:41 pm
Location: ipswich

Post by zukimudman »

yeh try that bush thats wat waswrong with mine
Top
Posts: 249
Joined: Tue Nov 02, 2004 4:16 pm
Location: Melbourne, Australia

Post by Sammyboy »

mine had problems with the bush as well. I had it replaced probably 2+ years ago and haven't had any trouble since... oh yeah and it only cost me about $20
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.

1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

so this bush people keep mentioning... cant find it i dont think.

I took off the rubber gear lever boot, removed the rubber boot that goes over the gear lever at the transfere popped the gear lever out and there is nothing resembling a rubber bush.

am i not finding it or has it just vanished...

thanks im a noob to zuks. :roll:
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

It should be under the 2 metal pins that locate the lever.

Its the cup shaped bit under that.

It might not seem like a bush, they can get super hard.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

ok so, i think it must be that bush as i can now change gears by holding the lever in certain positions...

however i dont think the bush is there at all, here are two pics and unless its the small round seal inside the transfer below the two pins i dont think its there.

can some one confirm?

Image


I'm guessing its a rubberish style cup which sits at the bottom of this tube?
Image

as you can see in the pic there is a small black rubber o ring style thing but its only like 2mm thick. has some one done a dodge up and put this little bit of rubber in instead of the bush?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Yes there should be a bush that sits in there.
That is why you will be having issues.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

Image

Read this - http://zukioffroad.com/Tech_Library/tca ... ushing.htm

And your on your way :D

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

Taff wrote:It should be under the 2 metal pins that locate the lever.

Its the cup shaped bit under that.

It might not seem like a bush, they can get super hard.
thehanko wrote:unless its the small round seal inside the transfer below the two pins i dont think its there.

can some one confirm?

?
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

lay80n wrote:Image

Read this - http://zukioffroad.com/Tech_Library/tca ... ushing.htm

And your on your way :D

Layto....
yeah that bit is definitely not there...

hi ho hi ho off to the car parts dealer i go.

thanks a million guys

is there any particular kind of gear oil you need for these transfers?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

Taff wrote:
Taff wrote:It should be under the 2 metal pins that locate the lever.

Its the cup shaped bit under that.

It might not seem like a bush, they can get super hard.
thehanko wrote:unless its the small round seal inside the transfer below the two pins i dont think its there.

can some one confirm?

?
i mean like tiny no where near the size of the one in the photo, more like a 2mm o ring. im guessing someone put this in to try to sort it out short term.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

er...

suzuki dont have them and cant tell me when/if they will have them again...

thank gawd for ebay.

4wd products on ebay have these for $13.50 delivered for anyone else needing them in future.

cheers
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Suzispares at Seven Hills have them on the shelf also.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

how do you get that damn cup in place?!? the little locating pins for the lever get in the way. is there a trick to it or is it just one of those jobs you swear at until it somehow works.

:bad-words:
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

Just push it straight down to one side of them then flip it back to the right way up.

Dont be afraid to bend it, it will pop back into shape.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

Taff wrote:Just push it straight down to one side of them then flip it back to the right way up.

Dont be afraid to bend it, it will pop back into shape.
awsome thanks that got it. the old girl is rolling again!

see you out there
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 84 guests