Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Drill a hole in the other end (Through the other socket end) and use a bar through it... like the old tube spark plug spanners
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Cut your wheel brace, sleeve it with some O/size tube, drill some holes in the tube and rosette weld. You could weld the ends of the tube to the brace also, depending on the brace material and who welds it, but the rosette welds will hold no matter what.
Surely DAN you have a socket set ...............if so just go and buy a big farkin extension from local toool traders.............( i did read bout you havin ya mates but com'on wat do ya use wen you work on ya rig)= ya mates maybe
If not just do as 54 said and mod your existin wheellin brace
maybe
