Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mmm internet

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply

Does my 40 series look right as a 4 door ?

Yes
88
83%
No
18
17%
 
Total votes: 106

Posts: 212
Joined: Sun Apr 19, 2009 8:40 am
Location: Branxton

Post by phat-customs »

I like it, very well done!

is the divider going to be removed from the 3rd window back???
The Box-Kite Paj: Gone...
Now: 96 TDI Disco, 2" Lift, 265's and a leaky windscreen...
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

Is it my wonky eyes or is that back door 'centre line' sloping downward slightly at the rear...?
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Post by Canyonero 4x4 »

Time for a build up thread
Dave
Top
Posts: 35
Joined: Sun Jul 12, 2009 11:55 am
Location: Perth

Post by Seth »

I want one :lol: Mate that is cool
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Will the door handles be level?
Top
Posts: 220
Joined: Wed Jul 15, 2009 3:15 pm
Location: Australia

Post by SteelArt »

To all those guys offering input thanks for the comments.

To the clowns asking stupid questions about door handles and the likes you do realise that the door is held in place with packing tape and blue tack ?? I don't have enough skill to make the alignment correct is mock up stage, luckily I think I can fumble my way though the welding stuff.

Andrew, yes it is from you old 40 :roll: see I said I would use the body :twisted:

There is a build thread over on 4wd Monthly - http://www.4wdmonthly.com.au/forum/show ... hp?t=74644
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

SteelArt wrote:To all those guys offering input thanks for the comments.

To the clowns asking stupid questions about door handles and the likes you do realise that the door is held in place with packing tape and blue tack ?? I don't have enough skill to make the alignment correct is mock up stage, luckily I think I can fumble my way though the welding stuff.

Andrew, yes it is from you old 40 :roll: see I said I would use the body :twisted:

There is a build thread over on 4wd Monthly - http://www.4wdmonthly.com.au/forum/show ... hp?t=74644
I'm glad you can weld because you suck at answering questions politely...

How should I know what is holding the door on? You are mocking it up fella, not me.

Maybe don't ask for input if you can't handle a simple question next time.
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

I think it would look better with no side rear glass at all


Image
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

lump_a_charcoal wrote:Will the door handles be level?
My god, that is a low bloody question to ask lump-a.
This is not legal advice.
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Image
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

jet-6 wrote:Image
That looks way cool like that. Kind of like the old baker's vans or no window panel vans. Window would be cool as long as it's a one piece and no divider like the original pics.
http://www.populationparty.org.au/
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

A bit more space at the front of the rear wheel arch?

Image

Incidentally I am pretty sure I've seen cars where part of the rear flare is attached to the door instead of the body, gives a better opening that way.
This is not legal advice.
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

chimpboy wrote:A bit more space at the front of the rear wheel arch?

Image

Incidentally I am pretty sure I've seen cars where part of the rear flare is attached to the door instead of the body, gives a better opening that way.
FTW!!!!

I reckon this is about the betterest evolution so far.

P.S. the zombie dog is freakin me out dude!!!!
http://www.populationparty.org.au/
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

fark yeah!! Chimpboy with the win.

That looks cool :cool:
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

another vote for the chimps design!

Looks cool, def needs a solid peice glass on the rear.
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

I like the no rear glass - looks a bit FJ cruiser (the Yankee prado based one). Chimps door is cool too - having the flare on the door might help to hide any cutting/welding/bogging sins
Tetanus rolling on 37's
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

dogbreath_48 wrote: having the flare on the door might help to hide any cutting/welding/bogging sins
'Tis not a sin if the bastard holds together my son
http://www.populationparty.org.au/
Top
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

Post by richardsc »

looks good mate,i dont mind the smaller rear door,if u made it bigger u might as well just get a troopy,should look great with what your plans are
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

chimpboy wrote:A bit more space at the front of the rear wheel arch?

Image

Incidentally I am pretty sure I've seen cars where part of the rear flare is attached to the door instead of the body, gives a better opening that way.
I think it would be a better result to move the rear axle backwards a couple of inches rather than encroaching on the cabin space by making the wheel tub larger towards the front of the vehicle
Ransom note = demand + collage
Top
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

Lol looks amazingly similar to a Jk wrangler unlimited.

Image

:P
Top
Posts: 302
Joined: Sun Feb 04, 2007 8:37 pm
Location: Bendigo

Post by krusty182 »

Yom wrote:Lol looks amazingly similar to a Jk wrangler unlimited.
with less chance of spontaneous combustion.
---> insert witty remark here <---
Top
Posts: 1032
Joined: Mon Mar 17, 2003 10:14 am
Location: Newcastle, NSW

Contact:
Contact Heathx4

Post by Heathx4 »

Tidy. Good length. Nothing wrong with a thin rear door. Looks just like my Crewman ;-)

Image
* Nothing is foolproof to a sufficiently talented fool *
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Hey same as my hand brake!
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

VERY cool!!

i like it, probably the most interesting thing i have seen here in AGES!

well done man, i cant wait to see the finished product!

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

grimbo wrote:
chimpboy wrote:A bit more space at the front of the rear wheel arch?

Image

Incidentally I am pretty sure I've seen cars where part of the rear flare is attached to the door instead of the body, gives a better opening that way.
I think it would be a better result to move the rear axle backwards a couple of inches rather than encroaching on the cabin space by making the wheel tub larger towards the front of the vehicle
this looks SCMICK. teh rear arch looks a tad to big though.
Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

I wouldnt bother with another door, ALL that extra work, and how many times will you ever use it. If anything just fill that section in. Lookup BJ46 it was a genuine MWB example produced by Toyota


I'll try find a pic.


http://en.wikipedia.org/wiki/Toyota_FJ40
hands and mums dont count!!!
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Post by shortyq »

the good ol 55 must have scared them of the 4 door 4 a while hey!
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

shortyq wrote:the good ol 55 must have scared them of the 4 door 4 a while hey!
FJ55 models discontinued circa 1979, next 4 door landcruiser was the 60 series circa 1980.

Yeah, no cease of production in the wagons :lol:
hands and mums dont count!!!
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

There was also a FJ45LV wagon (not many in aus though, but definitely better looking than a 55)
hands and mums dont count!!!
Top
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

Nah forget the rear door. Do it like the old TJ Unlimited's which were released in the US but sadly not in australia:


Image


bit of a lift and bigger tyres and it's the perfect wheelbase.


Image
Image


and i wanna know what the yellow thing in the back left of the 40 photo is ;)

cheers
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 10 guests