Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TD42T Auto Trans I need help

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 5
Joined: Sat Oct 31, 2009 9:23 am
Location: B.C Canada

TD42T Auto Trans I need help

Post by tmbrwlf »

Hi guys I have been reading alot of stuff in these forums the past couple days, and there seems to alot of very friendly and helpful people here. This seems to be the only place I can find any info on these motors and drive lines, and I really Need Help. Heres my problem, I have a 94 TD42T with an auto Trans, it is in a UD 1400, and has an o/d button on the shifter. The motor works awsome, lots of power, but when I am trying to get up to speed the trans keeps wanting to drop a gear, which in turn limits my speed, and will not upshift again. Tops me out between 50 and 60 kilometers an hour. I have tried with the o/d on, and off, and it doesn't make a difference either way. If anyone can help me I would really appreciate it. Thank you so much in advance

Kent
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

Post by mikebarnett »

im not a auto trans guru BUT to my very limited knowledge because they are computer operated you at the best can only give it a service/flush/filter etc over here in nz i get my same year and motor as yours done by a auto trans dude who has all the high tech plug it in diagnostic stuff for your AUTO COMPUTER etc and will sort it for you im sure,money well spent considering the cost off a rebuild,just my 2cents worth
Posts: 5
Joined: Sat Oct 31, 2009 9:23 am
Location: B.C Canada

Post by tmbrwlf »

Thank you very nuch for your reply. we have tried the flush, filter thing with no change. I am having a hard time so far finding anyone close to where I am in Canada, that has a computer reader or program for this truck, but i am still trying. And thank you again for your reply.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Probably not it, but on Toyota's sometimes they can play up a bit if the kickdown cable is loose, maybe try kickdown cable, also is there a power button that holds it in gears longer, thats not jammed on electronically or something??
hands and mums dont count!!!
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

is it getting lockup
Posts: 5
Joined: Sat Oct 31, 2009 9:23 am
Location: B.C Canada

Post by tmbrwlf »

The cable seems to be fine, and yes it seems to be getting lockup fine. Everything seems to be very normal except, my speed tops out at about 60 kmh, and if i hold it to the floor, it down shifts, and will not up shift again unless i back way off the fuel
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

Post by mikebarnett »

COMPUTER ,..............OR REBUILD.....!
Posts: 5
Joined: Sat Oct 31, 2009 9:23 am
Location: B.C Canada

Post by tmbrwlf »

i am looking, trying to find someone with a computer now. I will let you all know my findings when I find someone. As for the rebuild, I have alot of experience with domestic vehicles, and don't believe a rebuild is neseccary. I will keep you updated on my fidings.
Posts: 136
Joined: Wed Mar 03, 2004 2:29 am
Location: Gold Coast

Post by MQPatrol »

Also worth a look at the TPS on the IP also. Usually a replacement item is required if it hasnt been mucked around with. Take to auto trans guy to make sure its working ok or maybe someone smarter than I here knows the correct way to adjust them.
Duct tape is like the Force,
it has a light side, a dark side
and holds the universe together.
Posts: 5
Joined: Sat Oct 31, 2009 9:23 am
Location: B.C Canada

Post by tmbrwlf »

Thank you very much, i will try this also
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests