Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tb4.2 petrol
tb4.2 petrol
hi, just wondering if anyone could tell me if i can change the front oil seal on the block with out taking the motor out of the car and how hard it is to do. thanks ando
red mickey thompson 88' mav shorty /ute 2'body,2'lift,33'tyres, 4xlightforce240s,winch, twin ally snorkel,internal cage,rear arb locker,internal hot water shower
If you are talking about front crankshaft seal then yes you can do this without pulling the motor out. You need to remove all belts and fan. Then the harmonic balancer. The seal is actually in the aluminium front housing not the block.
Not a hard job and it takes about 2 hours depending on how fast you can work.
The seal can be bought from Nissan for $21.00 - I dont have the part number handy.
Not a hard job and it takes about 2 hours depending on how fast you can work.
The seal can be bought from Nissan for $21.00 - I dont have the part number handy.
Nissan GQ Patrol '89
TB45 ~ LPG ~ 33' bighorns
TB45 ~ LPG ~ 33' bighorns
Who is online
Users browsing this forum: No registered users and 0 guests