Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fuel gauge - only reads from half tank down??

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 398
Joined: Wed Feb 06, 2008 12:52 pm
Location: Sunshine Coast

fuel gauge - only reads from half tank down??

Post by islandvitara »

my fuel gauge is inacurate?? sometimes it works sometimes it doesnt, when i fill it up the gauge immediatly reads empty or juz doesnt work - but once the fuel tank drops to about halfway the gauge begins to read until empty??

whats going on? :?:
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

A bit like mine.

Full tank on gauge is at very bottom under bottom mark and full tank is about 2/3 on gauge and then goes upwards from full :)
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

yeh mine does the same, is it a common problem with suzuki's . is it a easy fix?
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

yeh, new sender from ebay. $40 delivered
http://cgi.ebay.com.au/Fuel-Sender-Unit ... 35a40cd392 just cause i'm a nice bloke :)
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Posts: 398
Joined: Wed Feb 06, 2008 12:52 pm
Location: Sunshine Coast

Post by islandvitara »

Pulled my tank out as it was cracked so I had it welded up at work. I also had a look at the sender, tradie said it could be a bad contact on the fine wire inside the sender. Undid the 3 metal tabs n took the cover off, thats when I saw that the tab thing inside wasnt making contact on the wires all the way, it was only making contact half way to the end - thus used a small washer to space out the rod as its spring loaded which forced it down gently. Now it makes contact top to bottom n checked it worked with a multimeter set at 200 ohms. All fixed =D
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest