Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear barwork

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Rear barwork

Post by zukmeista »

Can everyone that has a custom rear bar/bumper post a picture and an approximate cost? (and yes I have searched) ;)
Grow some balls.

That is all.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

what vehicle? Approx cost for what? Materials, labour or store bought?
Ransom note = demand + collage
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

sierra of course... cost of materials if homemade total cost if bought from somewhere
Grow some balls.

That is all.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

zukmeista wrote:sierra of course... cost of materials if homemade total cost if bought from somewhere
yeah of course Sierra because they never made Vitaras, LJs, X90s :roll:


So when you searched you didn't find any of the threads detailing the building of rear bars, or you didn't find the costs you are after?
Ransom note = demand + collage
Top
Posts: 398
Joined: Wed Feb 06, 2008 12:52 pm
Location: Sunshine Coast

Post by islandvitara »

grimbo wrote:
zukmeista wrote:sierra of course... cost of materials if homemade total cost if bought from somewhere
yeah of course Sierra because they never made Vitaras, LJs, X90s :roll:
quote]

:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
just beat a Marlin in a swimming race
Top
Posts: 169
Joined: Mon Jul 14, 2008 4:20 pm
Location: CQ, Aus

Post by Zook_Fan »

This is mine:

Image

Cost about $150 for steel, $30 for paint (2pac) and about $180 in LED lights, so all up $360. Needs to be modded for my bodylift now
[quote="v840"]Do you ever think that if Hitler had targeted idiots instead of Jews, shit might have gone down a lot differently?[/quote]
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

grimbo wrote:
zukmeista wrote:sierra of course... cost of materials if homemade total cost if bought from somewhere
yeah of course Sierra because they never made Vitaras, LJs, X90s :roll:


So when you searched you didn't find any of the threads detailing the building of rear bars, or you didn't find the costs you are after?
No, I did not find any threads directly relating to rear bars with the information that I was after. :?
Grow some balls.

That is all.
Top
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

zukmeista wrote:yeah cause you were being a smart arse... :bad-words:
welcome to outerlimits, have you had a look thru http://auszookers.com/index.php?name=Forums
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Cmon kiddies eat some sugar and play nice.

Back on topic, zukemeista there have been at least two threads about rear bars that i can remember, if you wait till the forum is a little more quiet so search will work again, just search for maybe 'rear AND bar' under the Suzuki section and see what comes up.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

or try spare wheel carrier, or swing away carrier
Ransom note = demand + collage
Top
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

Oh damn it, Grimbo edited all his posts... i should have quoted them before I went home.

Grimbo, it you went to as much effort helping people as you do telling them to search this place would be so much better. :roll:
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Top
Posts: 101
Joined: Mon May 23, 2005 12:15 pm
Location: Kilmore

Post by sierrafreak »

Seeing as its so hard to help someone here are a couple of link i found after searching.
(p.s) try searching rear* Bar* yourself it comes up with nothing!!!

http://www.outerlimits4x4.com/ftopic171 ... ght=bumper

http://www.4wdaction.com.au/forum/showt ... 306&page=2 <- At the bottom
LiVe HaRd DiE sIdE wAyS
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

Bump... Anyone else ? Don't you have one PJ.zook?
Grow some balls.

That is all.
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

Wow this thread was payout time :lol:

Suzys arse

Image

Mounts were welded plates bolted to the chassis bottom 2 holes.
And the side hangers are mounted to a plate welded on the tube part of the chassis. Hard to explain.

My flat plate mounts are now gone due to long springs and moved spring shackle mounts. so now they are sorta bodgee.. I have touched my bar on rocks once since i made it 1yr ago. It didnt budge. I have to be lucky to touch it :lol:
Image

Also rear quarters bottom pieces have been cut to suit. You could make this bar to suit your stock tailights. Its pretty simple. (i kept smashing mine, then i went for something i havent seen on sierra's)
I am Tim
Top
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

Post by zookprojectfnq »

I did mine awhile ago. Probly cost about 300 bucks with leds and resisters.

Image

Image
Image
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

Thanks to all the people who have contributed positively to this thread :)
Grow some balls.

That is all.
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

zukmeista wrote:Bump... Anyone else ? Don't you have one PJ.zook?
Yeh this is mine. It also doubles as an air tank. The pic of zook was before most of the mods, just got the rear bar finished for this trip.

Image


An over-centre catch from Schutties Fastners

Image



Stub axle from any trailer supply joint.

Image



I wanted to get tyre as close to door as possible for weight reasons.

Image



Almost completed and bomb proof. I also rounded off the corners too.

Image
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

How hard was it to install those lights in the rear corners?
Grow some balls.

That is all.
Top
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

I would post up but i was already linked :D
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

zukmeista wrote:How hard was it to install those lights in the rear corners?
Was pretty easy, i just cut away a little sheetmetal inside to enable better access to back quarter, then the lights bolted onto panel. Im not 100% happy with the lights, as they dont look as professional as i would like, and the panel doesnt have any flat surface thats parralel with the back of the vehicle, so the lights dont face backwards, they face outward by a few degrees.
I couldnt put them in the bar, as its made to hold air, not have bolts sticking through it.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 3
Joined: Fri Dec 02, 2005 12:39 am

Post by Justin drive SUZUKI »

Image
Image
some pretty ingenious barwork being posted on this thread. Mine is a pretty simple tube swingaway - these were before the current larger rims and tyres, the bar holds the new spare no prob. Can't remember the price sorry but I will say custom is the way to go.[/img]
Top
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

That barwork looks sweet :D :armsup:
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

Thanks Justin. Can you get some pictures of the hinge and how it is attached? ;)
Grow some balls.

That is all.
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

Bump. :finger:
Grow some balls.

That is all.
Top
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Post by zukmeista »

Come on... please :puppydogeyes:
Grow some balls.

That is all.
Top
Posts: 3
Joined: Fri Dec 02, 2005 12:39 am

Post by Justin drive SUZUKI »

Sorry, hadn't checked back here for a while. I'll post some on weekend if your still interested.
Top
Posts: 3
Joined: Fri Dec 02, 2005 12:39 am

Post by Justin drive SUZUKI »

Image
hinge
Image
latch
Image
towbar
Image
towbar mount
Image
bar mount
Top
Posts: 40
Joined: Wed Oct 20, 2004 6:02 am
Location: Norway

Post by ShuDuck »

zukmeista wrote:Come on... please :puppydogeyes:
mine

Image
413TT
413K
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Post by Pinball »

My poor old girl got this bustle...

http://www.pointnshoot.org/modules.php? ... =0&thold=0

has taken quite a few rock hits and survived, since put in led light strips between the tubes. Protects the longranger nicely too.

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 65 guests