Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gu series 2 zd30 injector pump
gu series 2 zd30 injector pump
After bit of help, my girlfriends patrol shit itself on monday, injector pump was the cause, got a quote for a reco pump $3700 plus labour.
Atm im trying to track 1 down from a wreck, any help would be much appreciated
Atm im trying to track 1 down from a wreck, any help would be much appreciated
ok update. picked up the missus's gu yesterday, paid 4nhalf grand, drove home 120km didnt miss a beat, pulls like a 14y/o. went to go to the pub last night 200 metres up the road and it stoped, bleed the fuel, checked conections, now when the ignition is turned on the tacho goes to 1200 and a relay or a module behind the dash is buzzing, not hapi jan
i was going to say, don't get a second hand one you'll just run into the same problems.
sorry to hear it shat itself again. That one is an electrical issue. Take it back to them, the computer ontop of the pump is a sensitive little thing and the wiring loom connecting it isn't crash hot either I'm told.
sorry to hear it shat itself again. That one is an electrical issue. Take it back to them, the computer ontop of the pump is a sensitive little thing and the wiring loom connecting it isn't crash hot either I'm told.
Sometimes starter motors that drop current momentarily when cranking can cause the trouble. It will only been seen when watching cranking amps on a scope. It sounds weird, but it will cause interferance because of the collapse in the current, casung an excessive magnetic field.
A new or reco starter sorts it out. The relay on the r/h inner guard can also cause troubles. Best to follow the procedure for that fault code to find the troubles.
Andy
A new or reco starter sorts it out. The relay on the r/h inner guard can also cause troubles. Best to follow the procedure for that fault code to find the troubles.
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Hi everyone,
since this was my car that was having the trouble I thought i would tell you all the outcome of the latest issue.
The reason it wouldnt crank and made that ticking noise was because the earth wire screw for the injector pump fell off!!!
Yeah not happy but the guy got it towed back to the workshop, fixed it, and towed it back to Chook at work.
So all better and I'm a gappy ZD30 driver again.
Mel
since this was my car that was having the trouble I thought i would tell you all the outcome of the latest issue.
The reason it wouldnt crank and made that ticking noise was because the earth wire screw for the injector pump fell off!!!
Yeah not happy but the guy got it towed back to the workshop, fixed it, and towed it back to Chook at work.
So all better and I'm a gappy ZD30 driver again.
Mel
Who is online
Users browsing this forum: No registered users and 151 guests