Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MK triton help

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 7
Joined: Wed Nov 18, 2009 6:57 am
Location: Cairns

MK triton help

Post by mk ute »

Hi guys,

Just purchased my first 4wd, a 98 MK dual cab. What I am after, is can anyone post up a couple of pics of where the wires run through from the body to the doors in the models with electric windows/central locking etc. I have a 4 door locking kit, as well as a couple of speakers to fit into the front doors, but I cant find any blank grommets. I am not opposed to drilling holes, but I would like to know approximately where the factory wires run.

I trust that this will be the first of many questions, and look forward to your help. I hope to get some pics up soon in the members ride section.

Cheers

Tim
Top
Posts: 18
Joined: Sun Jan 22, 2006 8:02 pm
Location: BELLBIRD PARK

Post by CORTY »

Yes.Had the same problem with my 99 club cab.
I'm sure holes were drilled approx half way up the door.
I used the rubber sausage thingy that came with my locking kit removed
doors, drilled holes, feed wires(plus speaker wires).
Works out ok.
Top
Posts: 7
Joined: Wed Nov 18, 2009 6:57 am
Location: Cairns

Post by mk ute »

cheers for that. dont suppost you have any pictures??
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 19 guests