Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3 speed auto rebuild
3 speed auto rebuild
anyone know where i can get a rebuilt 3 speed gearbox or rebuild kit from? mine slips badly until warm driving me crazy.
Any auto trans shop will be able to deal with the 3 speed - It's been used in holdens forever. I've been quoted about $600 for a rebuild (not drive - in drive-out - that was supply trans only to workshop)
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Re: 3 speed auto rebuild
New fluid correct level (trans warm motor running) .. will most likley be OK .. way cheaper give that a try prior to forking out for a rebuild you may not need.dmould66 wrote:anyone know where i can get a rebuilt 3 speed gearbox or rebuild kit from? mine slips badly until warm driving me crazy.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
I'd echo others comments about getting it rebuilt as opposed to DIY.
Autos are complex beasties / require special tools / and a nice clean environment to do properly.
Rebuild or second hand ( assuming the replacments not crap ) would be my choice.
Autos are complex beasties / require special tools / and a nice clean environment to do properly.
Rebuild or second hand ( assuming the replacments not crap ) would be my choice.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
box
there a trimatic box but differant. they run the same clutch plates, seals n
bands as all the othere trimatics do but run a differant planitary gears n
a differant pump, case, bellhousing, converter n valve body so pay an auto shop to do it there 1 of the cheapest autos 2 rebuild or get an
import ONE
bands as all the othere trimatics do but run a differant planitary gears n
a differant pump, case, bellhousing, converter n valve body so pay an auto shop to do it there 1 of the cheapest autos 2 rebuild or get an
import ONE
Who is online
Users browsing this forum: No registered users and 3 guests