ive finally got enough moola to do my mods to the spook.......i know its not as big or tough as some on here but its the next step up for me......
ordered the rh3 and 33"claws today....cleaned out one of the sheds and have the spook in there ready to sling the lux diffs under......
im in brissy today(wednesday)to find and pick up my turbo diesel...
i think ive changed my mind from the toyota 2ct to.............(duck and cover)....a 1l charade cbd......this little td has as much power as the sierra 1.3 and the torque of a 1.6 efi vitara..(it is being backed by a rh3)
i will be changing the turbo and upping the boost.......this engine will be easy to fit as everything is the same as a sierra and it will still get 800ks to a tank(42l)....
cant afford coilovers so ill be going the ranchos and coil springs.....
not sure if the budget will strech to chopping off the back yet.....
ill keep those who are interrested updated with pics and a writeup in the members rigs......
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MUD4B....WOOT WOOT
MUD4B....WOOT WOOT
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
what vehicle does this motor come from ?? had a quick poke about with google .. found that EKW had on for sale $1400 .. the called it a cbd-t ..
Anymore info you have would be great ...
Oh and daihatsu also make some HOOOGE ship and power generation diesal motors .. (motors along weigh 7 or more tonnes) not as hig as those 28,000 litre ones .. but still pretty large ...
Anymore info you have would be great ...
Oh and daihatsu also make some HOOOGE ship and power generation diesal motors .. (motors along weigh 7 or more tonnes) not as hig as those 28,000 litre ones .. but still pretty large ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Re: MUD4B....WOOT WOOT
mud4b wrote:not sure if the budget will strech to chopping off the back yet.....
But thats the cheapest Part.
Post Some pics to inspire us
yeshemesh
sorry people cant get on the net much now (living in the bush-house getting built)...
ive got the claws,the t-case is done(besides the mounts)the disc e-brake is also done.....pics soon...
ive got the engine and box......PROBLEMS.......
for the qs above its out of a fwd charade....it does not weigh much more than a std sierra engine.it has a alloy head and is only 3 cyl...the major prob im having is the box.....its out of a daihatsu hijet is rwd and the starter mounts from the gearbox side...it does fit as i was told but when the box is sitting strait the engine is on a 50 degree angle...rotate it you say....no can do.it is shifted by cables and when rotated to be inline with the engine there is no room for the cables!!!!!!swap a different box you say......im into that now....the problem ive got is i need to find one with the starter mounted from the box side not the engine side as there is no room......
lux diffs will be next after i get the engine sorted(if i cant work it out they both have to go back before its too late)
just out of interest. i recieved a letter from d.o.t the other day saying the 2ct(2lt turbo diesel) has been approved.....pity i cant afford it now....
promise ill get some pics up here soon(damo can you put em up for me)
ive got the claws,the t-case is done(besides the mounts)the disc e-brake is also done.....pics soon...
ive got the engine and box......PROBLEMS.......
for the qs above its out of a fwd charade....it does not weigh much more than a std sierra engine.it has a alloy head and is only 3 cyl...the major prob im having is the box.....its out of a daihatsu hijet is rwd and the starter mounts from the gearbox side...it does fit as i was told but when the box is sitting strait the engine is on a 50 degree angle...rotate it you say....no can do.it is shifted by cables and when rotated to be inline with the engine there is no room for the cables!!!!!!swap a different box you say......im into that now....the problem ive got is i need to find one with the starter mounted from the box side not the engine side as there is no room......
lux diffs will be next after i get the engine sorted(if i cant work it out they both have to go back before its too late)
just out of interest. i recieved a letter from d.o.t the other day saying the 2ct(2lt turbo diesel) has been approved.....pity i cant afford it now....
promise ill get some pics up here soon(damo can you put em up for me)
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
FUN........mmmmmmm
the 2ct will be easier and harder in different ways.....the box mounts to the engine for sure.......the engine mounts on the 2ct almost line up with the sierra one....other than that everything is on the opposite side to the sierra.....but it wont take that long to work out....
the 2ct will be easier and harder in different ways.....the box mounts to the engine for sure.......the engine mounts on the 2ct almost line up with the sierra one....other than that everything is on the opposite side to the sierra.....but it wont take that long to work out....
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
hi all...i have access to a pc now so ill keep you all posted....i could not afford the 2ct so ive now got a 1.6 efi supercharged engine going into it....
for now.....
its almost done..but now i have run into one big problem.......time.....
ive just purchased suziworx on the sunshine coast......it will be mine in two months......woot woot......
for now.....
its almost done..but now i have run into one big problem.......time.....
ive just purchased suziworx on the sunshine coast......it will be mine in two months......woot woot......
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
stumped wrote:mud4b wrote:ive just purchased suziworx on the sunshine coast......it will be mine in two months......woot woot......
instant new friendscongrats on the purchase
I'm thinking instant source of cheap parts
Mud4b and I have been friends since Primary School
DMA Founding Member #1 - Now Retired
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
mud4b wrote:we are cheap(prices)anyway......but i will be offering a discount for ol forum members.....
excellent. Pity bout the diesel, i want to put one in my zook, but its at the botttom of the to-do list dammit. Blown 1.6l sounds the goods though.
layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
mud4b wrote:sorry people cant get on the net much now (living in the bush-house getting built)...
ive got the claws,the t-case is done(besides the mounts)the disc e-brake is also done.....pics soon...
ive got the engine and box......PROBLEMS.......
for the qs above its out of a fwd charade....it does not weigh much more than a std sierra engine.it has a alloy head and is only 3 cyl...the major prob im having is the box.....its out of a daihatsu hijet is rwd and the starter mounts from the gearbox side...it does fit as i was told but when the box is sitting strait the engine is on a 50 degree angle...rotate it you say....no can do.it is shifted by cables and when rotated to be inline with the engine there is no room for the cables!!!!!!swap a different box you say......im into that now....the problem ive got is i need to find one with the starter mounted from the box side not the engine side as there is no room......
lux diffs will be next after i get the engine sorted(if i cant work it out they both have to go back before its too late)
just out of interest. i recieved a letter from d.o.t the other day saying the 2ct(2lt turbo diesel) has been approved.....pity i cant afford it now....
promise ill get some pics up here soon(damo can you put em up for me)
Dude, where's the pics?
Who is online
Users browsing this forum: No registered users and 1 guest