Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo Diesel gauges

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Turbo Diesel gauges

Post by TheBigBoy »

What gauges to get for my turbo diesel cruiser? Obviously a boost gauge, and EGT gauge. But whats more important after that, Water Temp or Oil Temp??

Is it worth getting a oil cooler? Any other advice?
Top
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

Oil pressure would be my next concern. Dont want a damaged oil feed buggering the turbo and engine.
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Post by TheBigBoy »

Already have oil pressure in factory cluster. So noone would bother with water temp, or oil temp?
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

TheBigBoy wrote:Already have oil pressure in factory cluster. So noone would bother with water temp, or oil temp?
Don't trust the factory oil guage. Water temp next. That is if you need any of them.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

Oil temp
Oil pressure
Water temp
Water pressure
fuel pressure
fuel temperature
brake fluid temperature
exhaust gas temp
intake temps post and pre intercooler
manifold vacuum
battery voltage
battery current draw

Make sure you have at least 5 of each gauge, measuring at different parts of the applicable system!

Remember you can never have too many guages. The more you have the cooler you look!

While you're at it, add some lexus badges.
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

There's no need to be a tool about it.

A few of the vital guages are a must I think. Coolant temp, engine oil pressure should be minimum.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Post by TheBigBoy »

Always 1 isnt there oldmate...

I wouldnt bother with any, if I was going to leave it factory set up.

I have plans on intercooling/turbo upgrade etc... Just want to make sure I have the correct gauges. But im not going stupid with them.

Maybe I should have a poll of water temp vs oil temp...
Top
Posts: 40
Joined: Mon Dec 01, 2008 8:06 am
Location: Perth

Post by rapid80 »

I run 1 of the engine watchdog gauges for engine temp. It bolts on to what ever you want so doesn't need to be in the coolant. The alarm helps cos you can't be checking gauges in the heat of battle. Mine is bolted onto the cyl head as I figure thats usually the 1st casualty from overheating and I want to know what the temp of the metal is not the coolant or oil running through it.
Top
Posts: 79
Joined: Mon Dec 04, 2006 5:53 am
Location: Middlemount, QLD

Post by diby_2000 »

I'm looking at getting one of these EMS2

Just dont know where its going to go yet.
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Post by TheBigBoy »

That looks pretty cool...
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Post by TheBigBoy »

That looks pretty cool...
Top
Posts: 34
Joined: Thu Oct 01, 2009 4:07 pm
Location: Just up the adult shop picking up some toys for your mum.

Post by 87 Turbo Hilux »

i run a oil pressure gauge, and a oil cooler so i dont have to worry about temp. a coolant temp gauge, my temp gauge in my dash isnt even hooked up and it still moves, and a boost gauge..use mechanical gauges they are way more accurate then electrical.
87 hilux,2.8,garret turbo,tru trac rear,gauge,3" lift fnt,2" lift rear.
94 hilux,2.8,denco turbo kit,14psi,racing seats,comp bar & tray,air locker fnt,tru trac rear,sliders,2" lift,33's.
Top
Posts: 111
Joined: Tue Apr 28, 2009 9:24 pm
Location: rockhampton

Post by stock.as.arock »

just a oil pressure gauge and leave it at that
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 149 guests