Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What power steer box for ser.III ?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 43
Joined: Thu Jan 22, 2004 8:25 pm
Location: Woodford.Qld

What power steer box for ser.III ?

Post by LandyLad »

I would like to install power steering in my series III swb. but have no idea what system to use ! I have been told to use Defender but cant afford this ! Is there a cheap and easy alternative ? Any info would be greatly appreciated ! :?
If it aint broke, dont fix it !!
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

A mate had a volvo car one in, hooked to a 60 series steering column.

the ptoblem is that i think you either need to moce the front crossmember forward 4 inches to fit the box (doesent matter which box) or you need to notch in or something!

Anyway good luck and post up if you ever have happen to do it!
Top
Posts: 162
Joined: Mon Apr 14, 2003 12:23 am
Location: Canberra

Post by suzidisco »

the power steer unit from the 2.4l skyline thinks it pre 85 fits perfectly with minimal mods and they are reasonable cheap had it in my series for two years before it was sold with no probs.
Top
Posts: 58
Joined: Mon Oct 28, 2002 11:54 am
Location: USA (OZ some day!)

Post by Adam »

I have the box from an 80 series Land Cruiser on my IIA, it fits very nicely on the outside of the framerail. The nose section of the box tucks in just behind the breakfast panel- no crossmember mods necessary.
Adam
1964 Land Rover 88", modifications in progress
Top
Posts: 389
Joined: Sun Nov 10, 2002 9:51 pm
Location: Melbourne

Post by LOCKY »

Ran a Volvo box on my Hybrid 90. Good til 35's went on it. Reverted it to Rangie box.

Better option or a 60 Series Box can be used.
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

suzidisco wrote:the power steer unit from the 2.4l skyline thinks it pre 85 fits perfectly with minimal mods and they are reasonable cheap had it in my series for two years before it was sold with no probs.


Can u explain this or show us a quick diagram???

This could be a possible option for me down the track

Thanks
Dave!
Top
Posts: 162
Joined: Mon Apr 14, 2003 12:23 am
Location: Canberra

Post by suzidisco »

You need the steering coloum and the power steer box (all in one ) and the ball joint that goes with the box . The power steer box goes up on a brake support bracket (i had one or mod your own ) on the fire wall. you will need to fab up a new steering arm from the p/bow to the front cross member i had the Vn engine with a power steer pump on it so it was plumb up to that . I only had 31 on but it was a reasonable light steer. i got no pic cause i sold her in 96 and got the disco. go to a wrecker and have a look at the unit in the car it is not a hrad job to fit and it cheap.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 2 guests