Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Stainless Steel snorkel for gq shorty what size? 3" or

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 110
Joined: Sun Sep 07, 2008 10:22 pm
Location: Australia, QLD Sunshine Coast

Stainless Steel snorkel for gq shorty what size? 3" or

Post by BrentE »

Just wondering what size pipe people are running for stainless snorkel, will 4" be overkill on shorty? Also where is best place to get rubber bends, tubing to carby and grommets?

cheers
1991 4.2 petrol shorty, dual batteries, IPF spoties, ROH Alloy's, roof racks, 2inch lift kit, 33 inch tyres, 2 1/2 inch exhaust with extractors, rock sliders
Top
Posts: 317
Joined: Thu Dec 11, 2008 8:22 pm
Location: Oriental 4WD Adelaide

Post by mhgill »

3" Snorkel looks to small on a GQ IMHO, maybe not so bad on a short but in a LWN they look poxy.

3" is for zooks :)
GQ 5" coils 35" Muds FOR SALE
98 GU 4500 ST Stock.
Top
Posts: 860
Joined: Sat Mar 07, 2009 1:14 pm
Location: Newcastle

Post by ethann »

For the bends you should be able to get them from Supercheap shouldn't you? Intercooler bends, Is that what they use?
Team Lock n load.
www.facebook.com/locknloadaustralia
Top
Posts: 419
Joined: Mon Jul 02, 2007 8:00 pm
Location: Emerald vic

Post by KYSI »

Go to truck bits and get the black rubber bends they have, around
$35 each. Silicon bends will cost ya a left nut and i havent seen anyone using them anyway. Go with 4'' also
Top
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

Had 3in on my shorty and just put 4in on my GU. IMO they both looked good for the vehicle they are on.

As your on the sunny coast and dont mind travelling go to Gympie (steveo's truck spares) for the black rubber bends. I rang around and he was the best price by $5 a bend. Half the price of one truck place in Nambour!!! Even gives you a discount for multiple bends (I bought 6).

cheers

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Top
Posts: 110
Joined: Sun Sep 07, 2008 10:22 pm
Location: Australia, QLD Sunshine Coast

Post by BrentE »

Thanks for replys, i think i may go 4" that place in gympie sounds good for bends ill call in there soon.

Which style would be most suitable?
With ram..
Image
or.. without
Image

For looks without ram looks better i think.
1991 4.2 petrol shorty, dual batteries, IPF spoties, ROH Alloy's, roof racks, 2inch lift kit, 33 inch tyres, 2 1/2 inch exhaust with extractors, rock sliders
Top
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

I had bought the 4" ram head for my GU, and their size is very deceiving. To keep it at roof line, there was next to no pipe up the pillar, looked terrible, so took them back (steveo's) and just have rear facing bends like the pic. Sounds awesome :cool: Dunno if performance is any difference
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Top
Posts: 110
Joined: Sun Sep 07, 2008 10:22 pm
Location: Australia, QLD Sunshine Coast

Post by BrentE »

hmmm yer i wonder if it actually improves performance with Ram-head... if so wouldnt barely be noticeablei bet.
1991 4.2 petrol shorty, dual batteries, IPF spoties, ROH Alloy's, roof racks, 2inch lift kit, 33 inch tyres, 2 1/2 inch exhaust with extractors, rock sliders
Top
Posts: 19
Joined: Sat Jan 26, 2008 1:30 pm
Location: Warragul, Vic

Post by outtacontrolpatrol »

i used 3 inch full stainless have no issues with airflow, have mates with 4'' on race car but it has a habit of getting squashed cause it hangs out a bit further. . . .


http://www.flickr.com/photos/40257133@N08/4139145059/

http://www.flickr.com/photos/40257133@N08/4139890728/
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

3" will moire than suffice more most stock engines and airfilters.
hands and mums dont count!!!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 43 guests