Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lightweight driveline ideas for minibuggy
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Small and light and a reasonable amount of power for the size I would think.chimpboy wrote:Is the motorbike engine desirable because it's small or is there some other reason I am not getting?
What's the difference between ignorance and apathy? I don't know and I don't care.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Air cooled, I can kind of see the advantage. But overall, sheesh you can just drop a FWD car engine in with gearbox and front diff all in one piece (heck you wouldn't even need to take it apart), and the main part of your drivetrain is sorted, it just doesn't seem worth stuffing around with a mc engine and not even having a reverse gear.
This is not legal advice.
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho
There's a lot of MC engines that are water cooled, but the rads are quite compact and run a thermo. Having said that unless they're getting airflow, the thermos are on constantly so a larger rad and thermo would be a good idea.bad_religion_au wrote:will an aircooled cool well enough doing 4k's an hour at 6000rpm under load?
i dunno much about them, but there's a huge difference in the type of enviornment your asking them to work in in a buggy compared with a road bike.
The main reason is that they are incredibly light. Magnesium/aluminium cases with sleeved bores means you can pick up a motor and gearbox by yourself almost. But yes, not having a reverse gear is making me start to trend back to a FWD motor.
Now that we've debated the pro's and con's of engine choice can someone point me in the direction of some links or school me on steering options? Will the power steer pump from a small FWD car run the hydro steer on a buggy? how does the steering box work up at the steering wheel and how does it know when to stop allowing flow to the ram/steering box? Can you use a remote steering controller with a steering box to eliminate having to route a steering shaft or is it not worth the effort?
http://www.populationparty.org.au/
I have a old pintara 2.4L motor and box with all wiring / ecu here. I had looked at something very simalier.
1st gear 2.65 X the diff 4.1 = 10.8 : 1
X this by your diff ratio 4.8 = 52.15
In a patrol with 4:1 reduced transfer gears this is the ratio:
1st gear 2.78 (auto) X 4 = 11.12 X diff 4.6 = 51.15
And how many auto Nissan Patrols are running around with 37 + tyres and 3.9-4.6 diff ratios that you know off?
So the FWD car setup is the go, Suzuki swift 1 L auto you can buy one for $200 these your motor, box with diff ratio, should weigh about 80 kg small in size and cheap / easy to get and repair.
1st gear 2.65 X the diff 4.1 = 10.8 : 1
X this by your diff ratio 4.8 = 52.15
In a patrol with 4:1 reduced transfer gears this is the ratio:
1st gear 2.78 (auto) X 4 = 11.12 X diff 4.6 = 51.15
And how many auto Nissan Patrols are running around with 37 + tyres and 3.9-4.6 diff ratios that you know off?
So the FWD car setup is the go, Suzuki swift 1 L auto you can buy one for $200 these your motor, box with diff ratio, should weigh about 80 kg small in size and cheap / easy to get and repair.
MAX TRAXION
0429-193238
Some where in the dust......
0429-193238
Some where in the dust......
Why not running gear from a big capacity 4x4 quad bike. You would have light weight, high and low range and 4wd. Just a thought.
Edit: Early 2wd Suzuki Quadrunners had the engine and gear box in one unit and CV shafts running to rear wheels. They had high, low range and reverse so if you mounted engine sideways you could run shafts to diffs. Not sure how strong it would be though. Oh and they were step through box so no clutch. They also came in 4wd with shaft to front wheels running forward out of bottom of engine casing to a solid mounted diff, then CV shafts to front wheels.
Edit: Early 2wd Suzuki Quadrunners had the engine and gear box in one unit and CV shafts running to rear wheels. They had high, low range and reverse so if you mounted engine sideways you could run shafts to diffs. Not sure how strong it would be though. Oh and they were step through box so no clutch. They also came in 4wd with shaft to front wheels running forward out of bottom of engine casing to a solid mounted diff, then CV shafts to front wheels.
Last edited by uted1 on Wed Dec 02, 2009 7:26 am, edited 2 times in total.
1966 fj45v
68 fj 40 build http://downunder4x4.net/forum/showthread.php?t=9759
1964 fj45 Hot rod
1982 fj45 Troopie
68 fj 40 build http://downunder4x4.net/forum/showthread.php?t=9759
1964 fj45 Hot rod
1982 fj45 Troopie
I have a Polaris 300cc 2wd quad and did ring ARB Tamworth as they sell polaris but his thourghts where because they are belt driven would not work and the chain driven early model suks, kawasaki, honda whould not be suitable. Why would you buy a quad for $500 and up whan you can get a Swift, Charade, Suzuki 800cc hatch for under $200?
MAX TRAXION
0429-193238
Some where in the dust......
0429-193238
Some where in the dust......
Who is online
Users browsing this forum: No registered users and 134 guests