Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lightweight driveline ideas for minibuggy

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Is the motorbike engine desirable because it's small or is there some other reason I am not getting?
This is not legal advice.
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

chimpboy wrote:Is the motorbike engine desirable because it's small or is there some other reason I am not getting?
Small and light and a reasonable amount of power for the size I would think.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 80
Joined: Fri Jul 02, 2004 1:27 pm
Location: Kalgoorlie W.A.

Post by Cluffy »

If it's an aircooled motorbike motor it would make for a much smaller install, prob need an airflow fan though.
...........shedbound.............
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Air cooled, I can kind of see the advantage. But overall, sheesh you can just drop a FWD car engine in with gearbox and front diff all in one piece (heck you wouldn't even need to take it apart), and the main part of your drivetrain is sorted, it just doesn't seem worth stuffing around with a mc engine and not even having a reverse gear.
This is not legal advice.
Posts: 80
Joined: Fri Jul 02, 2004 1:27 pm
Location: Kalgoorlie W.A.

Post by Cluffy »

A transaxle out of a fiat nikki would be perfect in a buggy, 650cc aircooled twin, 4 gears and reverse.
A mate just bought a whole licensed one for $500.
...........shedbound.............
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

will an aircooled cool well enough doing 4k's an hour at 6000rpm under load?

i dunno much about them, but there's a huge difference in the type of enviornment your asking them to work in in a buggy compared with a road bike.
Spit my last breath
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

bad_religion_au wrote:will an aircooled cool well enough doing 4k's an hour at 6000rpm under load?

i dunno much about them, but there's a huge difference in the type of enviornment your asking them to work in in a buggy compared with a road bike.
There's a lot of MC engines that are water cooled, but the rads are quite compact and run a thermo. Having said that unless they're getting airflow, the thermos are on constantly so a larger rad and thermo would be a good idea.

The main reason is that they are incredibly light. Magnesium/aluminium cases with sleeved bores means you can pick up a motor and gearbox by yourself almost. But yes, not having a reverse gear is making me start to trend back to a FWD motor.

Now that we've debated the pro's and con's of engine choice can someone point me in the direction of some links or school me on steering options? Will the power steer pump from a small FWD car run the hydro steer on a buggy? how does the steering box work up at the steering wheel and how does it know when to stop allowing flow to the ram/steering box? Can you use a remote steering controller with a steering box to eliminate having to route a steering shaft or is it not worth the effort?
http://www.populationparty.org.au/
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

FWD for reverse gear!!
hands and mums dont count!!!
Posts: 66
Joined: Tue Jul 05, 2005 9:27 pm
Location: newcastle

Post by maxtrax »

I have a old pintara 2.4L motor and box with all wiring / ecu here. I had looked at something very simalier.

1st gear 2.65 X the diff 4.1 = 10.8 : 1
X this by your diff ratio 4.8 = 52.15

In a patrol with 4:1 reduced transfer gears this is the ratio:

1st gear 2.78 (auto) X 4 = 11.12 X diff 4.6 = 51.15

And how many auto Nissan Patrols are running around with 37 + tyres and 3.9-4.6 diff ratios that you know off?

So the FWD car setup is the go, Suzuki swift 1 L auto you can buy one for $200 these your motor, box with diff ratio, should weigh about 80 kg small in size and cheap / easy to get and repair.
MAX TRAXION
0429-193238
Some where in the dust......
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

Mocks old buggy was a FWD engine,auto MQ flipped diffs(4.6)
used a sv21 camry motor !!
Image
Image
Image
Image
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

maxtrax wrote:I have a old pintara 2.4L motor and box with all wiring / ecu here. I had looked at something very simalier.
It'll kill the toughest modded zooks!
hands and mums dont count!!!
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Mocks one looks like the go.
hands and mums dont count!!!
Posts: 93
Joined: Wed May 14, 2008 11:36 pm
Location: Nth Tassie

Post by uted1 »

Why not running gear from a big capacity 4x4 quad bike. You would have light weight, high and low range and 4wd. Just a thought.

Edit: Early 2wd Suzuki Quadrunners had the engine and gear box in one unit and CV shafts running to rear wheels. They had high, low range and reverse so if you mounted engine sideways you could run shafts to diffs. Not sure how strong it would be though. Oh and they were step through box so no clutch. They also came in 4wd with shaft to front wheels running forward out of bottom of engine casing to a solid mounted diff, then CV shafts to front wheels.
Last edited by uted1 on Wed Dec 02, 2009 7:26 am, edited 2 times in total.
1966 fj45v
68 fj 40 build http://downunder4x4.net/forum/showthread.php?t=9759
1964 fj45 Hot rod
1982 fj45 Troopie
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

uted1 wrote:Why not running gear from a big capacity 4x4 quad bike. You would have light weight, high and low range and 4wd. Just a thought
Some of them are auto and 4x4 and reverse, so it could work.....
hands and mums dont count!!!
Posts: 66
Joined: Tue Jul 05, 2005 9:27 pm
Location: newcastle

Post by maxtrax »

I have a Polaris 300cc 2wd quad and did ring ARB Tamworth as they sell polaris but his thourghts where because they are belt driven would not work and the chain driven early model suks, kawasaki, honda whould not be suitable. Why would you buy a quad for $500 and up whan you can get a Swift, Charade, Suzuki 800cc hatch for under $200?
MAX TRAXION
0429-193238
Some where in the dust......
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests