Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Front Inner Axle Seal on 60 Series
Moderators: toaddog, Elmo, DUDELUX
Front Inner Axle Seal on 60 Series
Hi, i blew a cv on my 60 series, (no great surprise there) and the shards of metal have rendered my axle seal useless, i dont have a seal puller or nething fancy, i have basic tools and am just wondering if anyone has ne tips to get the seal out easily?
Me + Landcruiser = Instant entertainment
if you just add RUM!!
if you just add RUM!!
I've been known to use an allen key to lever them out with. Treat it with some marlin inner seals when you rebuild.. http://locktup4x4.com.au/hilux-solid-fr ... r-274.html
the seals are easy to do.
to get it out cave the seal in from the inner part of the opening with a screw driver and hammer. just work your way around it. once it's caved in enough it will pry out easy with a screwdriver.
to put a new one in just use a socket the same size as the seal, with an extention bar, and tap it in with a hammer, making sure it goes in evenly.
If you have a bit of trouble getting the seal in evenly you can tap it in in a 12 oclock, 3, 6, 9 oclock rotation using a socket extension, or anything that is blunt (drift, you might have needed one for the cone washers?)
to get it out cave the seal in from the inner part of the opening with a screw driver and hammer. just work your way around it. once it's caved in enough it will pry out easy with a screwdriver.
to put a new one in just use a socket the same size as the seal, with an extention bar, and tap it in with a hammer, making sure it goes in evenly.
If you have a bit of trouble getting the seal in evenly you can tap it in in a 12 oclock, 3, 6, 9 oclock rotation using a socket extension, or anything that is blunt (drift, you might have needed one for the cone washers?)
Who is online
Users browsing this forum: No registered users and 0 guests