ok i have searched here and on google and cant find much but i want to know what tyre manufactures make a 30x9.5x15 size tyre in either an all terain or mud terrain pattern and if you have used this size and type of tyre what are they like
i am looking at getting a set for a KIA SPORTAGE (yes i know so dont laugh or make useless comments i am only after info about the tyres) and i do a fair bit of road driving and not so much off road (well not as much as i would like any way) and when i do i like to do all different types (such as mud rocks sand forest trails etc)
any help appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
30x 9.5x15 tyres
Moderators: toaddog, TWISTY, V8Patrol, Moderators
30x 9.5x15 tyres
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
30x9.5's are going to require a bit of trimming of the front bumper, and possibly a bit of "massaging" of the firewall seam near the bodymounts, may need to fold back about 1/2 inch of the rear of the front wheelarch up to about 12 inches (this varies from vehicle to vehicle and tyre to tyre).
You will probably need to get some F150/Bronco 4WD 15x7 rims (+7mm offsett IIRC) as the standard offset (45mm on a 6" rim) and tyre width will cause issues with the rear shock absorbers using the standard rims.
more info here
You will probably need to get some F150/Bronco 4WD 15x7 rims (+7mm offsett IIRC) as the standard offset (45mm on a 6" rim) and tyre width will cause issues with the rear shock absorbers using the standard rims.
more info here
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Stock Tyre - 30x9.50R15 .............. - 235/75R15
Section Width: 9.48 in 241 mm ...... Section Width: 9.25 in 235 mm
Rim Diameter: 15 in 381 mm ...........Rim Diameter: 15 in 381 mm
Rim Width Range: 6.5 - 8.5 in ...............Rim Width Range: 6 - 8.5 in
Overall Diameter: 29.99 in 761.74 mm ....Overall Diameter: 28.87 in 733.29 mm
Sidewall Height: 7.49 in 190.24 mm .....Sidewall Height: 6.93 in 176.02 mm
Radius: 14.99 in 380.74 mm .............. Radius: 14.43 in 366.52 mm
Circumference: 94.21 in 2392.9 mm..... Circumference: 90.69 in 2303.5 mm
Revs per Mile: 693.5 ................ ......Revs per Mile: 720.4
Actual Speed: 60 mph 100 km/h
Speedometer1: 62.3 mph 103. km/h
Speedometer Difference: - Speedometer Difference: 3.878% too fast
Diameter Difference: - Diameter Difference: 3.74%
Taken from.... http://www.1010tires.com/TireSizeCalcul ... ion=submit
Section Width: 9.48 in 241 mm ...... Section Width: 9.25 in 235 mm
Rim Diameter: 15 in 381 mm ...........Rim Diameter: 15 in 381 mm
Rim Width Range: 6.5 - 8.5 in ...............Rim Width Range: 6 - 8.5 in
Overall Diameter: 29.99 in 761.74 mm ....Overall Diameter: 28.87 in 733.29 mm
Sidewall Height: 7.49 in 190.24 mm .....Sidewall Height: 6.93 in 176.02 mm
Radius: 14.99 in 380.74 mm .............. Radius: 14.43 in 366.52 mm
Circumference: 94.21 in 2392.9 mm..... Circumference: 90.69 in 2303.5 mm
Revs per Mile: 693.5 ................ ......Revs per Mile: 720.4
Actual Speed: 60 mph 100 km/h
Speedometer1: 62.3 mph 103. km/h
Speedometer Difference: - Speedometer Difference: 3.878% too fast
Diameter Difference: - Diameter Difference: 3.74%
Taken from.... http://www.1010tires.com/TireSizeCalcul ... ion=submit
Who is online
Users browsing this forum: No registered users and 2 guests