Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
L.E.D. blinker fix
L.E.D. blinker fix
Just fitted a custom bumper after getting sick of breaking one every time i go out. (Cheers Tuls)
Anyways blinkers flash way too fast with led's and i got qouted $80 for a led flasher unit, or $30 for 2 resistors.
Finally with some help from my auto sparky mate figured out that you can use a 2 point flasher unit that costs about $12 and plugs straight in to the fuse box. Just make sure you do not get it the wrong way round or you will blow a fuse.
STANDARD looks like
__
| |
Led flasher should look like
__
. |
If you put it in like this you will blow fuses
__
|
Part number is Bosch Flasher Unit P122
There is a equivelent narva item also.
Note that the new flasher unit is round and replaces the square one so there are no clips to hold it in so i taped it on as a precaution.
I dont use a fuse box cover either and am unsure if it would fit over the round flasher, but it looks like it would.
cheers mick
Anyways blinkers flash way too fast with led's and i got qouted $80 for a led flasher unit, or $30 for 2 resistors.
Finally with some help from my auto sparky mate figured out that you can use a 2 point flasher unit that costs about $12 and plugs straight in to the fuse box. Just make sure you do not get it the wrong way round or you will blow a fuse.
STANDARD looks like
__
| |
Led flasher should look like
__
. |
If you put it in like this you will blow fuses
__
|
Part number is Bosch Flasher Unit P122
There is a equivelent narva item also.
Note that the new flasher unit is round and replaces the square one so there are no clips to hold it in so i taped it on as a precaution.
I dont use a fuse box cover either and am unsure if it would fit over the round flasher, but it looks like it would.
cheers mick
This is ok if you are running led and incandecent globes. I use to run front led and rear led with incandecent side blinkers with this flasher unit. I recently changed side indicators to led and it didn't work with the flasher. Only way I could get it working was to use the standard flasher and have it flash super fast. Anyone know a flashed to use with full led blinker systems ?
If you pin your rear mudflaps up what will protect your tray from the random shopping trolleys you come across in the bushmrRocky wrote:haha custom tray and mudflaps on door hinges so they can be pinned up when being used offroad. Wouldnt mind some nice suzuki mudflaps though, cant find them anywhere
Front bar looks good
http://www.pointnshoot.org/modules.php? ... =0&thold=0mcwilly wrote:This is ok if you are running led and incandecent globes. I use to run front led and rear led with incandecent side blinkers with this flasher unit. I recently changed side indicators to led and it didn't work with the flasher. Only way I could get it working was to use the standard flasher and have it flash super fast. Anyone know a flashed to use with full led blinker systems ?
Spock
(only prob is you have no indication of a blown lamp... ADR issue)
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Who is online
Users browsing this forum: No registered users and 95 guests