Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ratio

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

ratio

Post by Rhett »

Does any one know the crawl ratio for a np205 transfer out of a f250, and 1st gear lexus quad cam auto?
Cheers Rhett
Its a wheelbase thing
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Dam dude. That gunna be a tight fit in the buggy. :D
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

NP205's are 1.96 from memory.

There is a crawler gearset for them - I think it's called the Lomax kit, but it's super expensive as it pretty much replaces the whole case.

They are also crazy heavy - 86kg.

Are you sure you want a 205?

Can't help with the 1st gear ratio for the auto.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

There are a few different autos that go behind the 1-2-3UZFE.
Is the one you want to use an AA80E?
8 speed auto... Probably not this one.

AA80E --
2007 LS460
Gear ratios: 1st - 4.596:1 2nd - 2.724:1 3rd - 1.864:1 4th - 1.464:1 5th - 1.231:1 6th - 1.000:1 7th - 0.824:1 8th - 0.685:1 Rev - 2.176:1

A model number will help heaps. ;)


When you find a model number check this out...
http://en.wikipedia.org/wiki/Toyota_A_transmission
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

If it's an A343F auto from a Surf (which is also found in Prado, some Landcruser's, Soarer (1UZ), etc.) then pretty sure the gear ratios are :

1st 2.804
2nd 1.531
3rd 1.000
4th (O/D) 0.753
reverse 2.293

BTW, if you use an AW4 (same as A34#) rear housing from a jeep you can bolt up a D300 ;)
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests