Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What thickness ???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

What thickness ???

Post by landy_man »

Looking at making some bolt on d-shackle brackets for the Rangie....

What would be the minimum thickness steel I should use...
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

I would use 8mm cause thats what I got lying around. Wouldnt use 5m or 6mm but would use 12mm if I had it.

Sam
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

I gather the picture is from off the poison spyder customs site...

This is what i just read there:

Poison Spyder Customs wrote:Poison Spyder Customs D-Shackle mounts are a versatile and easy way to create an attachment point on your trail machine. Machined from 1" mild steel with beveled edges to ensure a penetrating weld. A unique feature of this attachment point is the radius machined into its base. the radius allows you to perfectly locate mount on 1.5" to 3" tubing, or any flat surface. Excellent for square frames or tube chassis. D-Shackle mounts are weld-on only and are 1" thick, 2.5" in height, and 3.5" at the base.
DMA Founding Member #1 - Now Retired
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

yeah it is but they are a weld on tab....they would need to be thicker to allow a good penatrating (sp) weld on either side....
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

Strange Rover wrote:I would use 8mm cause thats what I got lying around. Wouldnt use 5m or 6mm but would use 12mm if I had it.

Sam


thanks sam
I have a big sheet of 10mm so I reckon that is what I will be using...just needed confirmation that it would be strong enough.
Top
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

10mm :shock:

For stuf like that, i recon what ever thickness you think will do then double it to make sure.

You dont want to worry about it every time you use it.
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

I think on ARB bull bars the recovery points (at least I think they are recovery points) would be lucky to be much more than 4mm thick.

The thickness of where the shackle goes through a snach block would also be only 2 lots of 3mm thick plate.

10mm will be heaps.

Sam
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Strange Rover wrote:I think on ARB bull bars the recovery points (at least I think they are recovery points) would be lucky to be much more than 4mm thick.

The thickness of where the shackle goes through a snach block would also be only 2 lots of 3mm thick plate.

10mm will be heaps.


I agree... I've seen stock brackets much thinner than that that were okay - not great, but okay. 10mm will be much better than just okay.

How you position the bolt holes in relation to the hole for the d-shackle will make a difference as well; you don't want the shackle to be able to "leverage" the bracket.

Well, I can't explain it but you probably get what I mean.

Jason
This is not legal advice.
Top
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

Im sure the ARB brackets arn't designed for heavy use as they do bend side ways, more of a towing point id think.

Also they arn't a small piece welded on, its part of the main bar that bolts to the chassis.
The bit sticking out the front is only about one tenth of the overall sheet.

10mm would probebly be ok but the stronger the beter.

So why did they go 20+mm in the pic above then ?
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

landy_man wrote:yeah it is but they are a weld on tab....they would need to be thicker to allow a good penatrating (sp) weld on either side....
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

The tabs on the bottom of ARB bars are NOT designed for heavy recovery. They bend like a mofo!!!
Top
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Post by rOd »

I thought those tabs are jack points for a high lift jack??? :?
Dont expect mere proof to sway my opinion.
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

rOd wrote:I thought those tabs are jack points for a high lift jack??? :?


Ditto - definately not a snatching point - perhaps you could use them for a tie down though.
DMA Founding Member #1 - Now Retired
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

rOd wrote:I thought those tabs are jack points for a high lift jack??? :?


I have seen several of these tear open when used incorrectly as a "snatch point" ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

The diameter of the pin in the Dshackle gives you a big hint as to the MINIMUMAL size plate thickness required.
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests