Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Air cond question

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Air cond question

Post by DionM »

My 81 2 door Auto has A/c fitted ... but not working.

The missing wire in the attached photo probably has something to do with it.

Anyone got any insight into how the A/C works in the earlier Rangies? Its got the "Custom Air" panel on the inside.
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Try to hook that wire up to where ever it came from. It normallyt ends up going to a pressure switch (which somewhere on one of the ac lines or on the reciever dryer) and then goes into the dash to the thermostate.

If you want to do a quick check to see if it works just temporarily join that wire to the battery and see if the clutch works. Then if your evaporator blower motor works then turn that on with th eloose wire powered up and see if it makes cold air. If this works then you just need to hook the loose wire up properly.

If the system hasnt worked for a while then its probably lost its gas anyway.

Sam
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Post by DionM »

Strange Rover wrote:Try to hook that wire up to where ever it came from. It normallyt ends up going to a pressure switch (which somewhere on one of the ac lines or on the reciever dryer) and then goes into the dash to the thermostate.

If you want to do a quick check to see if it works just temporarily join that wire to the battery and see if the clutch works. Then if your evaporator blower motor works then turn that on with th eloose wire powered up and see if it makes cold air. If this works then you just need to hook the loose wire up properly.

If the system hasnt worked for a while then its probably lost its gas anyway.

Sam


Thanks Sam. The blower motor works, and the a/c fan even starts, just not the clutch in this thing obviously. I'll whack it onto +12V and see what happens. Probably won't have any gas, but I should still be able to hear it cut in and out (extra load on the motor) ?
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

DionM wrote:. I'll whack it onto +12V and see what happens. Probably won't have any gas, but I should still be able to hear it cut in and out (extra load on the motor) ?


Spot on you should hear the clutch and feel the load on the engine.
If it all goes, get a re-gas and tell them to put a heap of oil in the system, drive around with it for a while, if it loses its gas pop the bonet and look for the ac joint, hose that is covered in ac oil and there is your problem

Good Luck
Tom
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Post by DionM »

RaginRover wrote:Spot on you should hear the clutch and feel the load on the engine.
If it all goes, get a re-gas and tell them to put a heap of oil in the system, drive around with it for a while, if it loses its gas pop the bonet and look for the ac joint, hose that is covered in ac oil and there is your problem

Good Luck
Tom


Thanks Tom. Another thing to do on the new beast on the weekend :D
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

You should also be able to see the clutch start spinning when you put power to that wire. With no power the very front part of the compressor shouldnt turn (the disc part that is in front of the pully) and when powered up it should lock onto the pully that the belts drive.

Sam
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

I see you are in brisbane - if you are close to logan village you could drop by and we can have a bit of a look. We do a bit of aircon work in our spare time - and work for beer and coke :cool:

Sam
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Post by DionM »

Strange Rover wrote:I see you are in brisbane - if you are close to logan village you could drop by and we can have a bit of a look. We do a bit of aircon work in our spare time - and work for beer and coke :cool:

Sam


Thanks Sam - I'll try it and see if it works. When the beast is rego'd I might take you up on your offer as the exchange sounds good - one cool refreshment for another type of cool refreshments :lol:
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 95
Joined: Mon Feb 10, 2003 8:09 pm
Location: Traralgon

AC

Post by RRover85 »

Its also a good idea to get a A/C dye chucked in the system.. it saves a lot of time in the long run trying to find a leak if you have to...
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

DionM wrote:
Strange Rover wrote:I see you are in brisbane - if you are close to logan village you could drop by and we can have a bit of a look. We do a bit of aircon work in our spare time - and work for beer and coke :cool:

Sam


Thanks Sam - I'll try it and see if it works. When the beast is rego'd I might take you up on your offer as the exchange sounds good - one cool refreshment for another type of cool refreshments :lol:


LOL ... a bit of air con :D
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests