Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help broken down troll

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 76
Joined: Fri Mar 14, 2008 3:46 pm
Location: caboolture

help broken down troll

Post by damo13 »

hey guys will ive had a look thru some other topics be for i put these up the only one i could find was one about a 4.2td and i dont no if its the same as a 2.8td.It started to play up the other day really hard to start just wined over and over than start with a bit of trouble so i thught it could be the fillter so cleand it out primed it same thing but now when it does start and i try to drive i get to about two grand and it cuts out but when its not driving i can rev it hard. Any ideas would be great it my only car and i need it asap. thanks damo13
suprise cockface its a rodeo
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Post by GUtripper »

Did you replace the fuel filter or just clean it out?? - replace it.
Even if it runs it may still have air in the system somewhere, which is what it sounds like. If the filter plunger is still soft, start the engine and keep pumping till the plunger is really hard to press on.

Dont know if (like 4.2's) the 2.8 has a thimble gauze filter in the top of the fuel pump, but if thats blocked it can also cause the symptoms you're describing.
Posts: 25
Joined: Thu Sep 24, 2009 10:30 pm
Location: adelaide

Post by daweclan »

Did you prime it at the filter first then at the injector pump? By that i mean did you bleed it ?
Posts: 3
Joined: Thu Jul 03, 2008 9:57 pm
Location: Southside

Post by windsor78 »

After cleaning the filter did you plug the MAF sensor back in? (if you unplugged it) I've done this and scratched my head for a bit wondering why I couldn't drive over two thousand rpm
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests