Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hi, ive got a SD33Td MK patrol, with a slight bend in the front diff.*cough* about 4-8 degrees *cough* A few years ago, i sorted another front diff, disc to disc though from a petty MQ, so its got different dif ratio's...
anyways, just wondering if i can just swap out the diff center and then rebolt the whole (new-ish) diff back under the car?
or is the whole swamozzle different? ive had a look on the outside and the housing seems identicle.
is there any special tools id need to swap the diff center? or just me handy socket set
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
how much you recon someone would charge to re-shimm the crownwheel? (iam sooo not looking to spend much cash) my little troll is already sucking up a bit of cash from the repaint iam doing to her.
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
