has anyone else had any dramas with a flat spot on a td42 in gq non turbo, standard, just recently its been a bit down on power just struggling all the time and when under full throttle say 2nd gear rev from 1000 to 4000 at about 3200 sort of skips a beat or two then carries on, other times its normal and perky. It takes about 4.5second to rev from 1000 to 4000 in second gear and getting about 600km per tank, 33in tyres standard gearing. One day it go up mout vic pass easy in third around 3000, other days is back to second with same load and tyres, just sort of feels like retarded ingnition timing on my old petrol
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
td42 engine flat spot
gday
i think my situation was simular but little different.. the more you rev it the more it didnt want to keep going up the rev range (3k plus). Anyway i looked for the filter from other posts and nothing in there (worth checking), i fitted an electric lift pump. Now it revs right through... big improvment, still blows no smoke at all oh well
i think my situation was simular but little different.. the more you rev it the more it didnt want to keep going up the rev range (3k plus). Anyway i looked for the filter from other posts and nothing in there (worth checking), i fitted an electric lift pump. Now it revs right through... big improvment, still blows no smoke at all oh well
95 GQ td42
3"lift 33 claws
covered in mud
3"lift 33 claws
covered in mud
think it would be this. chuck a low pressure (think mines a ~2-7psi - cant recall the brand but can check if needed) lift pump inline back near your tank. Prob just means the injector pump is starting to get bit tired. heaps of life with a lift pump tho...DEZ wrote:gday
i think my situation was simular but little different.. the more you rev it the more it didnt want to keep going up the rev range (3k plus). Anyway i looked for the filter from other posts and nothing in there (worth checking), i fitted an electric lift pump. Now it revs right through... big improvment, still blows no smoke at all oh well
Who is online
Users browsing this forum: No registered users and 3 guests