hey guys
this is my first post. i got a gq with the rb30 in it about a month ago. i've been going through a fair bit of mud and water. since then the alternator has s**t itself. i was wondering if it might be because of mud jamed in the bushes? the other thing im trying to find out is would a vl or r31 fit on it as im having trouble finding a gq one from a wreckers.
any info would be great
cheers corey
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gq rb30 alternator question
Moderator: -Scott-
prob just mud . you could try washing it out but prob wont work now. lol. a VL alt fits but you have to modify the alt housing to fit snug. i did this a couple of times. now i have a falcon alt in took heaps of grinding to make it fit. good luck.
that f***n hippy in that f*"*""n g60
76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.
buildup at downunder4x4.net
76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.
buildup at downunder4x4.net
Where is it? On my MU (yes I once owned a MU ) I relocated the alternator up high as the stock location was right down low and it caught a lot more crap that way. It never got clogged up again after that.
From ebay, this is what a VL one looks like:
If it looks the same you're probably in luck.
By the way the black box at the rear end of it holds the brushes and regulator and is removable with two screws, you might as well take that off and clean up inside, check brushes, and see if it works again afterwards.
From ebay, this is what a VL one looks like:
If it looks the same you're probably in luck.
By the way the black box at the rear end of it holds the brushes and regulator and is removable with two screws, you might as well take that off and clean up inside, check brushes, and see if it works again afterwards.
This is not legal advice.
Who is online
Users browsing this forum: No registered users and 0 guests