Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series bump stops
80 series bump stops
hey guys just wondering how i go about fitting 80 series bumpstops. do i have 2 do any altering of original bracket or weld sumfin 2 the chassy??? cheers
G'Day ,
no , no neeed to do any lopping and choping , just pull the spring out reamove the old bumpstop and bolt the new ones in .
they do look like they sit to one side but on full compression they line up spot on.
i did mine the other day and all i had to do was supply my own bolts as they didnt come with the bumpstops.
And dont forget to check that when the bumpstop is bottomed out, to make sure you still have (from memory) about 30 mm of upwards shock travel for when the BS fully compresses .
hope this helps a bit.
no , no neeed to do any lopping and choping , just pull the spring out reamove the old bumpstop and bolt the new ones in .
they do look like they sit to one side but on full compression they line up spot on.
i did mine the other day and all i had to do was supply my own bolts as they didnt come with the bumpstops.
And dont forget to check that when the bumpstop is bottomed out, to make sure you still have (from memory) about 30 mm of upwards shock travel for when the BS fully compresses .
hope this helps a bit.
G'day ,jemmos wrote:thanx for that chicken, but what about the rear? do i use 80 series or extend the factory ones sum how??? im running 4inch lift with 35s.
with the rear some people just throw some rhs in uder the bumpstop and tack it in place, other people use rhs to extend the actual mounting of the BS , but the idea i like the best , is from SIM79 , its neat and tidy looking
[/url]http://www.patrol4x4.com/forum/showthre ... p+stop[url]
hope this helps some
cheers , chicken
Last edited by chicken on Sun Jan 03, 2010 8:11 am, edited 3 times in total.
Who is online
Users browsing this forum: No registered users and 95 guests