Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series bump stops

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 103
Joined: Thu Jul 16, 2009 6:54 pm
Location: somerville, victoria

80 series bump stops

Post by jemmos »

hey guys just wondering how i go about fitting 80 series bumpstops. do i have 2 do any altering of original bracket or weld sumfin 2 the chassy??? cheers
Posts: 103
Joined: Thu Jul 16, 2009 6:54 pm
Location: somerville, victoria

Post by jemmos »

its on2 a 99 gu ute.sorry.thanx
Posts: 27
Joined: Sat Mar 07, 2009 7:29 am
Location: COBAR , no its not the middle of nowhere

Post by chicken »

G'Day ,
no , no neeed to do any lopping and choping , just pull the spring out reamove the old bumpstop and bolt the new ones in .
they do look like they sit to one side but on full compression they line up spot on.
i did mine the other day and all i had to do was supply my own bolts as they didnt come with the bumpstops.
And dont forget to check that when the bumpstop is bottomed out, to make sure you still have (from memory) about 30 mm of upwards shock travel for when the BS fully compresses .

hope this helps a bit.
Posts: 103
Joined: Thu Jul 16, 2009 6:54 pm
Location: somerville, victoria

Post by jemmos »

thanx for that chicken, but what about the rear? do i use 80 series or extend the factory ones sum how??? im running 4inch lift with 35s.
Posts: 27
Joined: Sat Mar 07, 2009 7:29 am
Location: COBAR , no its not the middle of nowhere

Post by chicken »

jemmos wrote:thanx for that chicken, but what about the rear? do i use 80 series or extend the factory ones sum how??? im running 4inch lift with 35s.
G'day ,
with the rear some people just throw some rhs in uder the bumpstop and tack it in place, other people use rhs to extend the actual mounting of the BS , but the idea i like the best , is from SIM79 , its neat and tidy looking

[/url]http://www.patrol4x4.com/forum/showthre ... p+stop[url]

hope this helps some

cheers , chicken
Last edited by chicken on Sun Jan 03, 2010 8:11 am, edited 3 times in total.
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Where is the best place to get 80 series bump stops? Anyone got a part number?
Posts: 27
Joined: Sat Mar 07, 2009 7:29 am
Location: COBAR , no its not the middle of nowhere

Post by chicken »

chunks wrote:Where is the best place to get 80 series bump stops? Anyone got a part number?
,G'day

i got mine from hobbzeys , i think $135 ? delivered . but in saying that they were a pedders bumpstop , not sure if i kept the packaging to get the part no. but ill check.

cheers chicken
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Cheers mate, same as the rubber caster correction bushes everyone sells are Pedders. I'll give them a call.
Posts: 195
Joined: Fri Oct 03, 2008 9:45 pm
Location: YES

Post by THICKNICK »

chunks wrote:Where is the best place to get 80 series bump stops? Anyone got a part number?
i went down to my local suspension place, and he had a set lying around that he gave me.
stainless and aluminium polishing northside brisbane. pm for details
Posts: 103
Joined: Thu Jul 16, 2009 6:54 pm
Location: somerville, victoria

Post by jemmos »

thanks 4 ur help chicken, that design looks good, but a bit over my head. mite stick with the rhs option, im only a chippy!!!ha ha!! thanx!!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests