Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hi , ive just started stripping and cutting back any rust on my MK, but i now recon i proberly shouldent ave started as iam finding SOOOOO much rust in the roof gutter and rear quater panels....
Dont realy know what to do, if i was gonna get it fixed properly id have to cut and weld new pieces in place, and would blow my budget out of the water. (would cost more than the little MK is worth) so iam left to boggin it up i guess...
I oughta take some pics just for the hell of it...
what about if i chop the roof and reweld another on is that do-able? or way to much hassel?
cheers.
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
bit sketchy but you could always lay up some fiberglass matting down the roof, then when set bog/fill to make it nice and smooth.
will buy you some years and cost about $50.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
My mate is in the same boat, it looked like someone fired a few shotgun rounds into the roof. He did as was suggested and cleaned up the rust, fiber glassed the holes and then bogged. It's come up pretty well.
Hi , ive just started stripping and cutting back any rust on my MK, but i now recon i proberly shouldent ave started as iam finding SOOOOO much rust in the roof gutter and rear quater panels....