Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ turning circle

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

GQ turning circle

Post by hiluxmad »

what causes the bad turning circle in the gq LWB?
is it the steering box or the knuckles?
using the diffs out of a GQ in my hilux conversion and want to try to eliminate the crap turning circle of the GQs
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 232
Joined: Sat Dec 05, 2009 6:33 am
Location: BUNDY

Re: GQ turning circle

Post by RIZZO »

hiluxmad wrote:what causes the bad turning circle in the gq LWB?
is it the steering box or the knuckles?
using the diffs out of a GQ in my hilux conversion and want to try to eliminate the crap turning circle of the GQs
i dont think its the pump mate, more to do with your knuckles and adjustments, but there turning circle is very average compared to the gu
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

i was more asking if the limitations are in the steering box or the diff itself ie steering knuckles and as i am putting them into a hilux would an IFS hilux steering box instead of a GQ one make the tuning circle better( if the limitations are in the box) or have no effect(limitations are in the knuckles)
would swaping to MQ/MK hubs(poormans histeer :D ) have any effect on turning circle?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

limitation at the knuckles. Any tighter and you'll have CV issues.

Wheelbase will play a big part in it. You will get a better turning circle the shorter you go.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests