Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3.4 turb-deis in hilux??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 17
Joined: Tue Aug 11, 2009 10:56 am
Location: noosa

3.4 turb-deis in hilux??

Post by chiso92 »

just wondering if the 3.4 turbo deiselo engin out of the short wheel-base land cruisers fit in to a gen 3 ln106 hilux?????????

cheers
Top
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

I have a vague memory of seeing one. So I say yes. Not sure there is a lot of room left at the front though. Using this motor also means using the bigger gearbox and transfer too. Additionally the cruiser transfer's output flanges are both offset unlike the hilux where the rear flange is centred. It would be alot of work to do right.
Top
Posts: 595
Joined: Sat Nov 02, 2002 2:09 pm
Location: Blackbutt, Queensland

Post by v8zuki »

use a gbox out of a surf or late hilux,bellhousing out of a dyna or daihatsu delta and it bolts togather engine mts line up just about 5mm out but the mount can flex that far if you want
i amputting a 13bt into my 106 should have a lot of torque compared to the 3l
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
Top
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

v8zuki wrote:use a gbox out of a surf or late hilux,bellhousing out of a dyna or daihatsu delta and it bolts togather engine mts line up just about 5mm out but the mount can flex that far if you want
i amputting a 13bt into my 106 should have a lot of torque compared to the 3l
will the gearbox handle the power?
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

a mate of mine yrs ago had one in a ln65 hilux.
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 595
Joined: Sat Nov 02, 2002 2:09 pm
Location: Blackbutt, Queensland

Post by v8zuki »

oldmate wrote:
v8zuki wrote:use a gbox out of a surf or late hilux,bellhousing out of a dyna or daihatsu delta and it bolts togather engine mts line up just about 5mm out but the mount can flex that far if you want
i amputting a 13bt into my 106 should have a lot of torque compared to the 3l
will the gearbox handle the power?
yes it will as it is the same gbox as fitted to the little trucks the motor came out of
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
Top
Posts: 55
Joined: Sun Nov 25, 2007 7:51 pm
Location: Benders

Post by Gav75 »

The 13BT has the H55F 5 speed gearbox behind it on my MWB cruiser. I dont think the hilux boxes and diffs are built as strong as the cruiser ones.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Gav75 wrote:The 13BT has the H55F 5 speed gearbox behind it on my MWB cruiser. I dont think the hilux boxes and diffs are built as strong as the cruiser ones.
G52 = not real strong
R150 = plenty strong

Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 6 guests