Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ steering Box questions

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

MQ steering Box questions

Post by Screwy »

hey guys,

1. Are the ratios in MQ steering boxes different in a powersteer box compared to a non-powersteer box?

also

2. is it possible to run a power steering box with the hoe outlets plugged and powersteer fluid in it but no pump?

cheers,

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Yes to both BUT heavy as hell.

bazzle
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

power steer

Post by DR Frankenstine »

hi screwy
Yes the ratios are different and you thought the steering was heavy before.
You can use just about any pump , I had a pump off an old falcon for ages when i had the 351v8 on board. worked fine.
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Saginaw pumps work really well, halved the steering effort in my MK
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Nah, i realise that all the pumps can be used if ya mount em right. Thats not the question.
My new steering setup from Offroad industries that ive fitted was designed and drilled for a power steering box.

I have lost my full lock by about 20mm either side of the bump stops which is about 4 inches on each wheels movement. ( i cant get around a coldasack in one go in the shorty MQ!!!! ).

If the ratios are definatly diferent then that would be the proplem for sure.
My V8 is going in in a little over a month, and im adapting the power steering pump to it, thats all cool.

wat im saying is that i dont want to wait a month, driving around with such a crapy turning circle before putting the v8 in. So i would like to know if i can put the power steering box on now, plug the pipes and fill with oil and drive it around with out the pump for a month until the V8 goes in with the pump on the v8, i dont want to but it on the diesel for a month...???

And will it damage the box?

thanks for ur help so far guys!

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

READ post no2 above

Bazzle :cool:
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

its not gonna damage it? Ive been told that the little valves inside might get stuffed?

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

I wouldn't try to drive it without the PS hooked up, I drove down my street without the PS hooked up after the engine swap and I could barely turn the wheel.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

well, ive got to buy the PS box anyways so IF it wont damage it ill fit it and c how bad it is, though i only have to put up with it for a month. I think i might rather a heavy wheel than one that barely has a turning circle........
Wat u think?

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Screwy_ScrewBall wrote:well, ive got to buy the PS box anyways so IF it wont damage it ill fit it and c how bad it is, though i only have to put up with it for a month. I think i might rather a heavy wheel than one that barely has a turning circle........
Wat u think?

Screwy


You wont be able to drive it safely on the road with a non connected PS box, I needed 2 hands pulling down on the wheel to barely get it to turn.

My advice...Don't do it.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 89
Joined: Tue Sep 30, 2003 7:06 pm
Location: Newcastle

Post by beefie »

stick with the 3 point turn till u get the v8 in as it feels like you are going to rip the column out of the dash just rolling out of the driveway
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

So its that heavy hey? fair enough ill leave it a month then.
Thanks Guys!!!

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

ps

Post by DR Frankenstine »

YAY
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Now i just need a powersteering box........
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

box

Post by DR Frankenstine »

Screwy_ScrewBall wrote:Now i just need a powersteering box........
oh what i thought you had one (how dumb am i ) i'll see what i can do! You want a pump to?
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Nah i got the pump and i can get the box, but not at the price i want it at.

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

power steer box

Post by DR Frankenstine »

I just sold pump and box for $500 how much do they want
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Not sure about the pump but they want $150 for the box.....

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

Post by DR Frankenstine »

Screwy_ScrewBall wrote:Not sure about the pump but they want $150 for the box.....

Screwy
cheap!
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

so i should take it at that price then?

cheers,

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 81 guests