Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lokka adjustment

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 85
Joined: Sat Oct 09, 2004 3:44 pm
Location: DARWIN N.T

lokka adjustment

Post by damo lux »

I'm in the process of fitting a front lokka to my ln106 hilux.

My question is how do you adjust the clearances, the clearance for the cross shaft is 1/2 a thou out on the bottom end of the tolerance scale.
The inter cam clearance is 10 thou out on the bottom end as well.

The instructions are quite vague and not helpful, they just show where to measure and what the tolerances are.

Any help greatly appreciated.

Cheers
Posts: 43
Joined: Wed Sep 24, 2008 2:36 pm
Location: perth

Post by rusty bus »

There should have been shims in between the back of the spider gears and the carrier, i think these are what you use to adjust your clearance. I fitted mine in with it too loose thinking "ahh she will be right" better loose than tight aye?? wrong. Back lash is terrible now haha but i live with it. So try and be within specs. Might have to get slightly thicker shims or try to add/remove the shims to see if it helps.

cheers john.
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

rusty bus wrote:There should have been shims in between the back of the spider gears and the carrier, i think these are what you use to adjust your clearance. I fitted mine in with it too loose thinking "ahh she will be right" better loose than tight aye?? wrong. Back lash is terrible now haha but i live with it. So try and be within specs. Might have to get slightly thicker shims or try to add/remove the shims to see if it helps.

cheers john.

It was 4 years ago when I did Mine From Memory that what I did
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests