Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bad Bonnet Rattle

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 14
Joined: Tue Jan 10, 2006 11:37 am

Bad Bonnet Rattle

Post by LOCKER »

Got an annoying squeak and rattle coming the bonnet hinges I think, I can see the bonnet shaking sideways on corrugations etc so much so the paint on edge of the bonnet is chipping off where it is hitting against the body panels. Does anyone know if the GQ come out with rubber blocks to stop the bonnet moving. I thought about fitting bonnet pins to stop it moving, but these can rattle as well. Any suggestions would much apreciated.

It is really starting to piss me off
Posts: 5
Joined: Tue Sep 01, 2009 10:32 am
Location: Melboune

Post by sazzle »

You can wind up the bonnet rubbers at the front of your engine bay. If you wind them out a bit when you lock down the bonnet it will sit on Them It worked for me!
Posts: 5
Joined: Tue Sep 01, 2009 10:32 am
Location: Melboune

Post by sazzle »

You can wind up the bonnet rubbers at the front of your engine bay. If you wind them out a bit when you lock down the bonnet it will sit on Them It worked for me!
Posts: 103
Joined: Thu Feb 07, 2008 1:43 pm
Location: MELBOURNE

Post by ANDREWGQ 351 »

Or use rubber fuel line about 50mm long slit down side and push on edge of bonnet near the hinge, you may need a bit of glue as I found that mine vibrated around without it
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

I had exactly the same drama with my GQ. Drove me nuts creaking and rattling and chipping the paint. If you lube the hinges it gets worse!

I bought an extra set of rubber bonnet supports same as the front ones and fitted them up near the firewall. Its a five minute job and solves all your problems. It also makes the front rubbers last a bit longer too, but they still chop out after a while. I have heater hose slipped over the metal bodies now with a bit of silastic in the hole.
I did this about 6 years ago and its all good.
Posts: 43
Joined: Tue Feb 15, 2005 3:36 pm
Location: Melbourne

Post by HellfisH »

I have the same problem, some good info guys cheers :)
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

the rubber on the bonnet bump stops wear every three months or so...

now i just wrap duct tape round the bump stops to the desired level and bobs ya untie...
last' just as long a the originals...
duct tape *sigh* is there nothing it cant do? :lol:
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest