Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

aircon problem

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 38
Joined: Wed Jul 18, 2007 6:38 pm
Location: brisbane

aircon problem

Post by 4wd_pig »

ive got a problem with my aircon in my gq 4.2 diesel.

the compressor will not kick in and the electric fan that should turn on when the aircon is engaged doesnt run at all. ive checked the fuses and there are no blowen fuses. i was wondering if anyone has any suggestions where to start or if someone could point me in the dirrection of a wiring diagram for the aircon unit?
Top
Posts: 105
Joined: Sun Nov 18, 2007 7:12 pm
Location: Dont no

Post by msjc38 »

bridge the presure switch that should switchn the clutch on. If that works get it regased the system will not switch on with low pressure in the system
Top
Posts: 1288
Joined: Wed Sep 12, 2007 5:09 pm
Location: Glass house sunny coast

Post by purplebus »

msjc38 wrote:bridge the presure switch that should switchn the clutch on. If that works get it regased the system will not switch on with low pressure in the system
X2
only the first roll hurts, then its a ride..
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

purplebus wrote:
msjc38 wrote:bridge the presure switch that should switchn the clutch on. If that works get it regased the system will not switch on with low pressure in the system
X2
x3

I got mine done 2 months ago and it cost $500 odd, mainly because of some shagged lines and also cracked fittings on the condensor. Works great now!
Top
Posts: 38
Joined: Wed Jul 18, 2007 6:38 pm
Location: brisbane

Post by 4wd_pig »

how and wear am i bridging ?
Top
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

the low pressure switch is normally located on the reciever dryer. just need to bridge the 2 wires on there together. this should then send direct power to your compressor
Top
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

Try replacing the relay aswell. When mine shit itself in the GQ, it was the relay.... $5 fix.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests