Has anyone, or is it a matter of, taken front diff, transfer and other bits from a 4x4 and put into a 4x2?
Is it that simple? Considering there is no transfer lever and wiring harness is already in place. Is there a computer? assuming the rear prop shaft would be shorter to allow for transfer case.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
RA Rodeo 4x2 to 4x4 conversion
Moderator: Moderators
RA Rodeo 4x2 to 4x4 conversion
"If it ain't broken, smash it harder, then make it stronger!"
from what i have heard and read the rodeo 4x2 is actually based on the 4x4 chassis so there is no reason that you cant convert it the way you say
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Who is online
Users browsing this forum: No registered users and 0 guests