Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Whats this called

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 71
Joined: Tue Mar 27, 2007 2:27 am
Location: brisbane

Whats this called

Post by dirty dirty 4x4 »

I have a hilux LN106 with lots of slop in the steering the slop is coming from the arm thats attatched to the pitman arm and then to the (i presume) J arm

Im asking because im going to the wreckers tomorow and dont want to sound like a newb
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
Top
Posts: 48
Joined: Sun Jan 21, 2007 12:22 pm
Location: Woodford QLD

Post by cozzav8 »

Its just an idler box and arm, common as to flog out, i think you can get bush kits for them
79 Series RV, 305 Mickey T's, 2" OME, 3" into twin 4" stacks, LOL, Love it
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

being a 106 and having a j arm it sounds like the drag link.....
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

hiluxmad wrote:being a 106 and having a j arm it sounds like the drag link.....
Winner. :armsup:
You can buy kits for the ends but if the J arm ball is chewed out it's time for a new/second hand J arm. New is very expensive. You can also buy new complete drag links if the link slot is flogged out too.
Top
Posts: 52
Joined: Thu Mar 23, 2006 2:22 pm
Location: Ebenezer

Post by Bumpy45 »

Give FWD Motors a call on 3848 9323 at Yerongpilly. Good aftermarket gear at a great price.
Top
Posts: 129
Joined: Fri Nov 10, 2006 12:18 am
Location: Brisbane

Post by 1patrol »

Have u checked the idler itself? My draglink ends were buggered and i didnt notice the movement in the idler till i put a fair load on it. Anyway yeh go to repco and grab a couple of draglink repair kits mine were about $15 and easy to fit.
Top
Posts: 71
Joined: Tue Mar 27, 2007 2:27 am
Location: brisbane

Post by dirty dirty 4x4 »

I thought the drag links were the ones that went from wheel to wheel to keep the right alignment ?

by the way this is a solid axle hilux

I am quite familiar with the IFS
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
Top
Posts: 259
Joined: Mon Dec 03, 2007 2:40 pm
Location: geelong

Post by dillza_69 »

Draglink goes from pitman arm to swivel hub. Tie rod goes between wheels
Last edited by dillza_69 on Sat Jan 23, 2010 8:47 am, edited 1 time in total.
3RZ fan club member
_______
Welcome to the Internet where men are men, girls are men and kids are Federal Police
Top
Posts: 71
Joined: Tue Mar 27, 2007 2:27 am
Location: brisbane

Post by dirty dirty 4x4 »

thanks guys
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 22 guests