Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NISSAN sd33 diesel dimensions ???????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

NISSAN sd33 diesel dimensions ???????

Post by mick&shon »

just wanting to know if the sd33 diesel is the same dimensions as the RB30 ? L x W x H ?????
Last edited by mick&shon on Mon Jan 25, 2010 5:27 pm, edited 1 time in total.
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

L28 is a petrol engine, the sd33 is the desiel enging. And to answer your question, im sure the L28 and RB30 not the same size but could be close.
Its not cool, unless it's got boost :)
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

arh righto that explains a couple of things .i dont want to sound dumb i dont know much about patrols.so its the sd33 i should be chasing ??????????
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

mick&shon wrote:arh righto that explains a couple of things .i dont want to sound dumb i dont know much about patrols.so its the sd33 i should be chasing ??????????
Not necessarily.

MQ-MK had SD33 or SD33T as diesels, GQ had TD42 or TD42T.

So it depends what era you are looking at.
This is not legal advice.
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

ok ok ok ! all i want to know is the dimensions of the 2 motors. its not important what yr or model the patrol, because the sd33 is not for a nissan
cheers mick
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

mick&shon wrote:ok ok ok ! all i want to know is the dimensions of the 2 motors. its not important what yr or model the patrol, because the sd33 is not for a nissan
cheers mick
Okay, I just wasn't sure if you had identified the right engine model as you originally asked about an L28.
This is not legal advice.
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

yeap sorry mate i was going off the litres and not the engine code
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

if i remember, ill check the sd33 sittin in my backyard 2moz...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

thanks buddy
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

thanks for the PM reminder, totally forgot.

SD33 is 900x480x670 (LxWxH)

i do have the manifolds off so the width may be slightly more, but it wouldnt be much. oil filter sticks out to the side almost exactly in line with the edge of the bellhousing, dont think the manifold sticks out past this...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

thanks im going to try to fit it in a hi-lux with a turbo
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

where the 900 measured from?
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

mick&shon wrote:where the 900 measured from?
where the bellhousing bolts up to the end of the harmonic balancer
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

yeah mate ive been out with measureing tape too and yes its to long a TD 6 pot would of made a gr8 combo considering its a Xtra cab on 4 runner chassis
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 237
Joined: Sun Dec 06, 2009 2:03 pm
Location: QLD

Post by nerida67 »

mick,
your thinking of wat ???
putting an sd33 turbo in a hilux ???
a v6 commodore would be a better power upgrade option
(id prefer an sd33 over a v6 anyday)but in a little hilux engine bay a v6 would be better,heaps of people are doin them
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

yeah i know mate but thats whats so great about 4byin being out there mate and the if i want a petrol 6 id take the RB30 over the v6 after owning a skyline like i was saying i dont much about the nissan range of motors and i thought a 2.8l 6cyl diesel might of been the same dimensions of the RB but i have received enough info now to see other wise i thank all for there help
HAPPY WHEELIN :)
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

IMHO if you are doing an engine swap you are wasting your time fitting an IDI diesel.

Compared to DI diesels:
They are harder to start
they are less economical
less reliable (usually)
you have to run much lower boost pressures

For a hilux I would look at something like a:
Isuzu 4BE1 (3.6L 4cyl)
Isuzu 4BD1T (3.9L 4cyl)
Toyota 13BT (3.6L 4cyl)
ISUZU 4JJ1-TC (3.0L)

All of those engine have 130+ HP and HEAPS of torque in stock form. The SD33T puts out 100HP and cannot be tweaked anywhere near as much as the engines above.

IDI engines can run ~10psi max boost. All of the above could run 30+psi if you wanted to.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

^ good advice.
This is not legal advice.
Posts: 237
Joined: Sun Dec 06, 2009 2:03 pm
Location: QLD

Post by nerida67 »

ISUZUROVER,
your saying an sd33 is unreliable ??????
i got one here with just under 500,000 klm never had head of or rebuilt to prove otherwise (im the second owner and know cars history)
cheap to run ,will pull a 2 tonne trailer all day without dramas
and starts all the time
and NO its not a turbo,just straight sd33
Posts: 206
Joined: Thu Sep 02, 2004 4:32 am
Location: Jamaica/(Haiti)

Post by Lawrence »

nerida67 wrote:ISUZUROVER,
your saying an sd33 is unreliable ??????
i got one here with just under 500,000 klm never had head of or rebuilt to prove otherwise (im the second owner and know cars history)
cheap to run ,will pull a 2 tonne trailer all day without dramas
and starts all the time
and NO its not a turbo,just straight sd33
Yes, I would agree with that as all the diesels that I have heard running long mileage (sd33, td42, hz) are indirect diesels. Plus I would never call them unreliable.
89 gq dx. bone stock --- for now.
Posts: 206
Joined: Thu Sep 02, 2004 4:32 am
Location: Jamaica/(Haiti)

Post by Lawrence »

But in saying that, I have read where there are less economical and not as efficient as a direct injected engine. Plus most direct injected engines that are built these days, run turbos as they are generally smaller than the older engines.
89 gq dx. bone stock --- for now.
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests