Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TB42 / TB42 Exhuast manifold flange

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 36
Joined: Sat Nov 14, 2009 12:22 pm
Location: S/E Vic

TB42 / TB42 Exhuast manifold flange

Post by shanfab »

I'm thinking about Building a high mount turbo manifold for a TD42 .
I found an old AutoCad file in another topic and was going to get a couple of s/s Flanges cut . I was hopeing that maybe someone already has these on the shelf and I might me able to save my self some time and hassle ? .
if anyone knows of someone that has these or can cut them and let me know would be great .
Top
Posts: 6
Joined: Fri Mar 20, 2009 2:49 pm
Location: Australia

Post by LeighMac »

I had one laser cut, if you are talking about the part that bolts to the head. Now that they have it in there computer they said around 90-100 to cut another won if you are interested.
Top
Posts: 56
Joined: Sun Mar 23, 2008 11:51 pm
Location: Yeppoon

Post by BigrigCQ »

Can get them from pacemaker!

Perfect fit, can get from any exhaust shop.
Dont hold back, Limiter is there for a reason!!!
Top
Posts: 1
Joined: Sat Dec 12, 2009 9:34 pm
Location: longford

Post by pinchy03 »

From who and where did you get it laser cut ?. I'dlike to get one cut in S/S as well ?
Top
Posts: 305
Joined: Mon Apr 21, 2008 8:53 am
Location: New Zealand

Post by garth »

gudday

I have a PDF file of the 12mm Stainless header flanges kickin round somewhere if you still need it.
The headers were made with a separate flange for each port, to allow some movement.
If it suits your requirements let me know.

ps: much cheaper to get water cut!

regards garth
GQ with 30 PSI of TD42T.........
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests