I'm thinking about Building a high mount turbo manifold for a TD42 .
I found an old AutoCad file in another topic and was going to get a couple of s/s Flanges cut . I was hopeing that maybe someone already has these on the shelf and I might me able to save my self some time and hassle ? .
if anyone knows of someone that has these or can cut them and let me know would be great .
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TB42 / TB42 Exhuast manifold flange
gudday
I have a PDF file of the 12mm Stainless header flanges kickin round somewhere if you still need it.
The headers were made with a separate flange for each port, to allow some movement.
If it suits your requirements let me know.
ps: much cheaper to get water cut!
regards garth
I have a PDF file of the 12mm Stainless header flanges kickin round somewhere if you still need it.
The headers were made with a separate flange for each port, to allow some movement.
If it suits your requirements let me know.
ps: much cheaper to get water cut!
regards garth
GQ with 30 PSI of TD42T.........
Who is online
Users browsing this forum: No registered users and 0 guests