Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ/GU Diff Centers

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 41
Joined: Sat Jan 14, 2006 11:53 am
Location: [Brisbane] With a foot full of throttle! Letter rip!

GQ/GU Diff Centers

Post by NissanTuff »

Can any1 tell me if a GU rear center will fit into a GQ rear housing and axles.
Top
Posts: 27
Joined: Sun Jul 16, 2006 7:39 pm
Location: Ipswich Qld

Post by leesmkshorty »

Yes I put a GU 4.6 into my gq wagon, the only think i had to change was the yoke where the centre nut is as the GU's have a different holes setup and will not fit to a Gq tail shaft.
GQ , TD42, FRONT and REAR AIR LOCKERS, 4.6 RATIO DIFFS, EXTRACTOR,
Top
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

As long as its not a H260 (rear) from a GU. Some of the manuals (ZD30 and TB45) have H260's.

The most sought after (out of 2.8's) with the 4.6's are H233, so you're good!!
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Top
Posts: 41
Joined: Sat Jan 14, 2006 11:53 am
Location: [Brisbane] With a foot full of throttle! Letter rip!

Post by NissanTuff »

well bugger I missed ur post Bigbluemav. I got a gu rear center looks like Its could be a h260. The OD is heaps bigger. Is there any where on the center to tell what kind it is. The Gu center is 4:1.
Top
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

NissanTuff wrote:well bugger I missed ur post Bigbluemav. I got a gu rear center looks like Its could be a h260. The OD is heaps bigger. Is there any where on the center to tell what kind it is. The Gu center is 4:1.
Bummer!! It must have come out of manual TB45 or TD42T? All I know is that they are physically HEAPS bigger.

Anyone else able to offer any assistance?
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Top
Posts: 39
Joined: Sat Oct 10, 2009 9:10 pm
Location: Jimboomba

Post by YNOT »

Measure the diameter of the crown wheel. H260 = 260mm. H233 = 233mm.

Tony
Top
Posts: 41
Joined: Sat Jan 14, 2006 11:53 am
Location: [Brisbane] With a foot full of throttle! Letter rip!

Post by NissanTuff »

Yep its a H260. So any1 wanna buy a rear 4:1 H260 out of a GU. :twisted: Thanks 4 ur help fellas . :armsup:
Top
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Contact:
Contact MyGQ

Post by MyGQ »

Not all TD42T's have H260's

Just replaced the rear diff in a GU 2000 TD42T and it was running HG39 Diffs which are H233B 3.9:1 Ratio
AA's for Quitters
Top
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

MyGQ wrote:Not all TD42T's have H260's

Just replaced the rear diff in a GU 2000 TD42T and it was running HG39 Diffs which are H233B 3.9:1 Ratio
I'm not sure what the 'rule' is with diff sizes and ratios etc. BUT, I thought manual TD42T's had 4.1's and 3.9's were auto's (attached to TB45's)
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Top
Posts: 41
Joined: Sat Jan 14, 2006 11:53 am
Location: [Brisbane] With a foot full of throttle! Letter rip!

Post by NissanTuff »

Well not sure what it is now. But would like to find out so i can sell the thing. All I know its out of a GU Rear and its 4:1. And dont fit in my 96 GQ wagon td42.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests