Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

average lifespan of 86 hilux clutch

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

average lifespan of 86 hilux clutch

Post by collins110 »

just wondering if i have been treating it badly and i was wondering how long it should last ... and how much would a new clutch be worth?
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

How long is a Piece of string
I put a New Clutch in my RX, Drove 20 mins heard a bang Lost all clutch pedal Movement Pulled to the side of the road Trying the Clutch waited a couple seconds did it again Clutch came back,Turned into the strongest Ive ever had .Tore abit of linig off which jammed it up
Try this its a great one
http://clutchindustries.com.au/range/4t ... lutch.html
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Post by collins110 »

iv had it for 4 years behind the 2.2 the thrust race bearing is making its usual noises and i feel it slipping so it will go soon ... is 4 years good?
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

collins110 wrote:iv had it for 4 years behind the 2.2 the thrust race bearing is making its usual noises and i feel it slipping so it will go soon ... is 4 years good?

The race is the outside bit of the Bearing More likely the bearing is making the Noise
4yrs is ok But that depends on the KS Its Done as well

The Fourth pic in Shows the race (bit around the out side) and the Bearing (inside bit)well thats how i was taught
http://www.fotosearch.com/photos-images/bearings.html
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 72
Joined: Mon Jul 24, 2006 11:39 am
Location: darwin

clutchy

Post by claud »

mine is still going i swapped engines over and it looked fine so my spare is going rusty wanna buy it? they last heaps if u dont drop yr clutch and do silly shit too often i tow and go rock climbing a lot so shes done well 4cyl is low on power to wear them,
100$ shes yours
my other cars an xwgt silver fox custom xr interior go the windsors!
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Re: clutchy

Post by collins110 »

claud wrote:mine is still going i swapped engines over and it looked fine so my spare is going rusty wanna buy it? they last heaps if u dont drop yr clutch and do silly shit too often i tow and go rock climbing a lot so shes done well 4cyl is low on power to wear them,
100$ shes yours
thanks for the offer but im thinking of upgrading to a 4terrain clutch
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests