Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What lift to clear 31's on a jimny?
What lift to clear 31's on a jimny?
Hi guru's, as the subject states I would like to find out what lift is required to clear 31x10.5 cooper st's on wide ofset 15x7 rims. Thanks for your help
Too much.
Jimny's have tiny guards and have to be lifted sky high to clear 31's without cutting.
A better option is 235/85/16's on GV or XL-7 rims. It's all about the width. the 235 can tuck into the guards so you can run very low lift and the tyres will tuck into the guards so the cutting is behind the plastic.
In any case, you'll need to sort gearing and axle strength.
Steve.
Jimny's have tiny guards and have to be lifted sky high to clear 31's without cutting.
A better option is 235/85/16's on GV or XL-7 rims. It's all about the width. the 235 can tuck into the guards so you can run very low lift and the tyres will tuck into the guards so the cutting is behind the plastic.
In any case, you'll need to sort gearing and axle strength.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
i have fit 31's on my jimny. Had a 1.5" body lift (make sure you do this properly) 80mm toughdog suspension lift. Wheels were sierra offset 15x7's, dont go wider cause you'll regret it. If you can find some cheap 30" tyres you are better off with them, i had to trim the guards and the 31"ers still scrubbed.
i agree with mrRockey the grinder enables you to fit any tire size, i run 35's with about 2 hours worth of guard chopping and about 4 months of work to be able to make them turn 
JIMNY EXTREME ON LUX DIFFS
http://www.outerlimits4x4.com/ftopic185229.php
It's a JIMNY thing! (We don't care if you can't understand)
http://www.outerlimits4x4.com/ftopic185229.php
It's a JIMNY thing! (We don't care if you can't understand)
Thanks all for your help, I'm not sure what I will fit. I had 30x9.5's on my Sierra and was hoping to get a bit bigger on the Jimny just because most ruts on the trails are chewed out by much bigger tyres. My old Sierra had a 2 inch lift and the 30's still scrubed a little, the rims were 15x7's with I think -24 offset. If I continue to build the Jimny I will probably fit 30's and about a 3 inch lift and will have to chop the gaurds. Thanks again, Nick.
Who is online
Users browsing this forum: No registered users and 33 guests