Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

anyone know of a successful way to fix leak in diesel tank

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 39
Joined: Thu Feb 26, 2009 8:08 pm
Location: gladstone

anyone know of a successful way to fix leak in diesel tank

Post by mrgrumpysleeps »

hi,

My 80 series has sprung a leak behind one of the unused brackets near the top of the main tank, only leaks when its full and when 4wdriving. If i can find a 100% success of fixing it i will if not i'll pull it out.

any ideas?

cheers.
Todd.
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

fill it 1/2 full :D

or is that half empty ?






rip it out and weld it up
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Contact:
Contact me3@neuralfibre.com

Post by me3@neuralfibre.com »

Selleys Knead It / Permatex / DevCon

Clean / Roughen / Acetone
Come back in 5+ years.
Done it 3 times - never come off

Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Top
Posts: 160
Joined: Tue Dec 22, 2009 4:41 pm
Location: ...

Post by tufflux88 »

quicksteel should do it just hit it with a grinding wheel to roughen it up a bit first.
i dont it on my radiator and that hasnt leaked and its constantly under pressure unlike a fuel tank
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: anyone know of a successful way to fix leak in diesel ta

Post by bogged »

is it a standard size tank? If so, surely they would be dolllar a dozen? Get another one and fit it up...
Top
Posts: 120
Joined: Tue Aug 11, 2009 11:53 pm
Location: Launceston, TAS

Post by wacky »

Dont grind it lol. JB weld has a fuel-tank fixer sealant/putty, but any decent metal putty thats fuel resistant should be OK.
Top
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

I have used that resin type fix it before, and was still holding when I pulled the tank out. Got it from autobahn
Top
Posts: 384
Joined: Fri May 14, 2004 8:46 pm
Location: Yeppoon Queensland

Diesel Tank Repair

Post by stinger »

"Selleys Knead It / Permatex / DevCon

Clean / Roughen / Acetone
Come back in 5+ years.
Done it 3 times - never come off "

Had great success with DevCon, usually get it from speciality plumbers shops.

Preparation is the key. There are still a few of my tanks still floating out there with....
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 117 guests