Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Driving in low range on the black top

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Driving in low range on the black top

Post by frp88 »

Is it O.K to drive and tow my van in low for a long time say 1 hour ??
I have moded the transfer so it is low 2wd this is to help when we go to Rainbow at easter. I was thinking as I can't drive much faster then 80 anyway When you turn of at Gympie I have had it up 80 kays on the dirt in overdrive my old Middie just doesn't have any guts to pull it up the hills when you can't go flat out pulling the van areound a bend and up a hill.
LETS GO BRONCOS
Posts: 343
Joined: Sun Jan 11, 2009 8:31 am
Location: south coast wa

Post by kirstyandgrace »

Is this a trick question ??
unemployed homeless suzuki driving fool
Posts: 302
Joined: Sun Feb 04, 2007 8:37 pm
Location: Bendigo

Post by krusty182 »

I'm assuming by your user name and you said middie, you have a MWB cruiser. Because it's part time 4wd, the drivetrain will be fine even if you haven't converted the transfer, just don't lock the front hubs.
Only problem I see is getting above about 65km/h without the engine revving its tits off.
---> insert witty remark here <---
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Just stay in high range and use a lower gear on the highway.
If you havnt got enough power to use the lower gears in high range then you have another problem.

Bazzle
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

krusty182 wrote:I'm assuming by your user name and you said middie, you have a MWB cruiser. Because it's part time 4wd, the drivetrain will be fine even if you haven't converted the transfer, just don't lock the front hubs.
Only problem I see is getting above about 65km/h without the engine revving its tits off.
No drama the overdrive is so tall it wouldn't, from memory it does 80 at about 2800 rpm I'll see how I go
LETS GO BRONCOS
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

You will prob bugger the od bearings with the extra torque.

Bazzle
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest