Locktup4x4 CV's missing circlip

[Wozza244]

Hi just got my new CV's in the mail and they didnt come with the circlips needed for the installation, is this normal and it was my fault not ordering them or do you think they have forgot to add them in the box??

I got home too late to call them just wondering would toyota have them in stock cause we hav a shop in town.

[tom_286]

No new CVs Ive bought have come with circlips. Just use the ones from your old CVs

[dogbreath_48]

The ones for the very end of the axleshaft? My longs came with a few I think. But Toyota stock them, called the 'spring clip' and around $7 from memory.

[Wozza244]

Ok good job, but tom_286 i cant use the old ones cause 9/10 of them break when splitting the cv off the axle.

Cheers i shall head to toyota today

[tom_286]

Ok good job, but tom_286 i cant use the old ones cause 9/10 of them break when splitting the cv off the axle.

Cheers i shall head to toyota today

Ahh ok I know the circlip as the clip you put on the end of the stub axle after half the freewheeling hub is on. What your talking about I thought was a snap ring and yes they should have come with them.

[Hamo]

Ok good job, but tom_286 i cant use the old ones cause 9/10 of them break when splitting the cv off the axle.

Cheers i shall head to toyota today

and yes they should have come with them.

I've just purchased toyota cv's and had to buy the snap rings seperate

[RAY185]

Ok good job, but tom_286 i cant use the old ones cause 9/10 of them break when splitting the cv off the axle.

Cheers i shall head to toyota today

and yes they should have come with them.

I've just purchased toyota cv's and had to buy the snap rings seperate

Yep, always the way with genuine parts. Order a genuine water pump and you have to order a gasket for it seperately while every aftermarket waterpump comes with a gasket. Well it's how it works with Toyota anyway.

Every aftermarket CV I have bought (lots) have come with the replacement circlip/snap ring for the CV to inner axle.

[Chrismb]

thanks for the feedback guys, I am onto it

[4RUNNER_01]

Yea would be a good idea to include them (saves a trip to toyota due to nobody else stocking them)

Ahh ok I know the circlip as the clip you put on the end of the stub axle after half the freewheeling hub is on. What your talking about I thought was a snap ring and yes they should have come with them.

Mate he means the the spring clip that goes on the end of the axle inside the cv to hold it from coming off the axle.

[Chrismb]

just ordered a shiteload today and we will be including them with the CV's.

[4RUNNER_01]

just ordered a shiteload today and we will be including them with the CV's.

Nice, but only a few weeks too late all good but those CV's seem like a good bit of gear so far

[Wozza244]

just ordered a shiteload today and we will be including them with the CV's.

Ah good stuff, good products mate but i never asked on the phone cause 90% of other suppliers will supply a snap ring with the CV, my local bloke had none in stock so he undid a new cv pack and took it out for me.
All good mate cant wait to test out the cv's.

[bad_religion_au]

why not just martack it?

[4RUNNER_01]

why not just martack it?

is that putting the spot of weld on the end? i wanna do this when i next have to pull the cv's out but not sure how it works?

[troopymad]

http://www.island4x4.com/4x4tech/axle/t ... index.html