Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pricing a 1-HDT

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 34
Joined: Thu Mar 26, 2009 1:47 pm
Location: gatton qld

Pricing a 1-HDT

Post by land8079 »

Can anyone tell me what id be looking at paying for a second hand 1-HDT complete as apposed to a reco. thanks
Top
Posts: 73
Joined: Mon Feb 09, 2009 7:26 pm
Location: Hervey Bay/Brisbane

Post by Grylls »

Hey mate,

I priced up a 1HD-FTE the other day and it was $6600. Ud be looking at probably round $5500 for a 1HD-T. Thats a rough figure though. You might get one for less or more depending on who you know. If you can find one with low k's that would be the best bet. I'm rebuilding mine at the moment and its costing quite a bit. :cry:
Top
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

if you have to replace your 1hdt i would stick the 1hd fte in instead. there is a guy on here that can do you a harness for it
Top
Posts: 292
Joined: Wed Jan 09, 2008 12:20 pm
Location: Ipswich

Post by hilux79 »

I got priced 6500 last october. Was cheaper to rebuild the one I had.
Ben
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Re: Pricing a 1-HDT

Post by udm »

land8079 wrote:Can anyone tell me what id be looking at paying for a second hand 1-HDT complete as apposed to a reco. thanks
probably about the same (if recoed profesionally) , so i would rebuild own instead of buying used.
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 292
Joined: Wed Jan 09, 2008 12:20 pm
Location: Ipswich

Post by hilux79 »

What's wrong with your old motor that it needs a rebuild. If people know it will help give an idea on a rebuild cost cause a motor that has spun a main bearing and has been driven long enough to damage the crank is obviously going to cost more than a motor that is just tired.

You may also find that finding a good secondhand 1hdt is a bit hard.
Ben
Top
Posts: 211
Joined: Thu Oct 15, 2009 8:03 pm
Location: PORT STEPHENS

Post by rowenb »

My 1HDT is tired with blow by and a good oil leak at the back of the head. Need to remove head and while i'm at fit new rings and bearings to make pulling it apart worth while. Any idea what new bearings cost for the bottom end? Engine is still running well at just under 300k's but want to freshen it up but only doing what needs to be done.
Top
Posts: 4
Joined: Tue Aug 29, 2006 10:56 am
Location: Melbourne

Post by Turbohq »

Hi Guys.

I went through the whole process of rebuilding the 1hdt, the turbo and the pump. Lot's of $$$$ spent.
Now I've got the horsepower bug (I want an LS2) and will be selling the complete engine, turbo, pump and accessories, eg. alternator ps pump etc. EVERYTHING!!!
Also have custom front mount intercooler all receipts of work.
Engine is smooth and runs like a dream. Has down about 20,000km's will have to check reciepts to be exact.
Has brand new crank from toyota as part of rebuild.
I'm chasing $5,800 for the lot. will bolt straight in. $6,500 with gearbox and heavyduty clutch.
It was dynoed by PGS and made 98rwkw's on 35's.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 9 guests