Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1hz turbo
Moderators: toaddog, Elmo, DUDELUX
1HZs HAVE OIL SQUIRTERS FOR THE PISTONS
well the 1hz i rebuilt definitely did, you can put 1hdt the rods in and get pistons to suit with the 30 mm gudgen pins which is what i did. I also ceramic coated the pistons (about 200 bucks) as most blow with cracked pistons, it keeps the heat out. If i was to do it again i would get the head surface, exhaust ports and what not. And appearently the newer 1hz had a better designed precom chamber so i put them in as well.
well the 1hz i rebuilt definitely did, you can put 1hdt the rods in and get pistons to suit with the 30 mm gudgen pins which is what i did. I also ceramic coated the pistons (about 200 bucks) as most blow with cracked pistons, it keeps the heat out. If i was to do it again i would get the head surface, exhaust ports and what not. And appearently the newer 1hz had a better designed precom chamber so i put them in as well.
There is a guy around here getting 250hp+ from a 1hz. Motor was totally stock too. and has been running that setup for ages.
If i was going to do it id use a late model motor with the nitrided crank, better precomps,better rods, hydraulic timing belt tensioner etc.
If i was going to do it id use a late model motor with the nitrided crank, better precomps,better rods, hydraulic timing belt tensioner etc.
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
So what spec turbo is good for a higher powered job like this, it seems there is not alot being done with the good ol 1HZ. We may start seeing some big numbers coming out of them, that will test their relaibility and strength.
With regards to ceramic coating , i assume you would bore the cylinders first then size the pistons and have them coated.
It's only the top of the piston that gets coated isnt it?
With regards to ceramic coating , i assume you would bore the cylinders first then size the pistons and have them coated.
It's only the top of the piston that gets coated isnt it?
nup, wasnt me................
all 1hz's and 1hdts have pistion squirters. it was the older 2h that didn't, (and the 12ht turbo variant that did).
if your thinking 18-20psi i would not waste money on a rebuilt 1hz. pick up a low km 1hdt-fte for similar money.
if your thinking 18-20psi i would not waste money on a rebuilt 1hz. pick up a low km 1hdt-fte for similar money.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Who is online
Users browsing this forum: No registered users and 71 guests