Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rd28 to td42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 49
Joined: Mon Jul 07, 2008 3:17 pm
Location: Woodford

rd28 to td42

Post by 70DDZ »

i have just put a 4.2 in my 1997 gq that had a 2.8 in it i have eveything hooked up and running except for spedo and taco and 4x4 light the wiring harness is all hooked up if any 1 can help with these would be very help full the 4.2 is a 88 model
97 GQ dual cab 3''flexy lift custom tube bar and sliders 33''Claws
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

I did the same mod to mine, (since sold). The speedo should be working, the tacho wires will work, you have to intercept them under the dash and bring in the TD42 tacho wires from the timing cover sensor. I can't recall which wire but if you put the two wiring diagrams side by side it is easy enough to work out.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 49
Joined: Mon Jul 07, 2008 3:17 pm
Location: Woodford

Post by 70DDZ »

some one told me that older model gearboxs have a aspedo cabel and the rd28 was electric
97 GQ dual cab 3''flexy lift custom tube bar and sliders 33''Claws
Top
Posts: 206
Joined: Fri Feb 13, 2009 10:08 am
Location: Melbourne

Post by PBBIZ2 »

PM Clanky, he is a forum member and has just completed this same job.
Top
Posts: 18
Joined: Thu Nov 22, 2007 9:12 am
Location: Deer Park

rd28 to td42

Post by trump »

I did this conversion about two years ago and it was a direct swap unplug the loom from 2.8 gearbox change the plug on the end of the loom to suit the 4.2 gear box plug in and all had been right since.

Trump
Top
Posts: 49
Joined: Mon Jul 07, 2008 3:17 pm
Location: Woodford

Post by 70DDZ »

got it all workin thanks everyone for your help

Todd
97 GQ dual cab 3''flexy lift custom tube bar and sliders 33''Claws
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests