Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Swaping instrument clusters / compatability

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Swaping instrument clusters / compatability

Post by mrRocky »

Just wondering if i can swap my instrument cluster which has no tacho with one that does and if so what wire do i need to connect up to make the tacho work. am i correct in assuming the other gauges will work with just plugging in the standard plugs on my car.
I have a baleno 1st gen motor with 1 coil only so i realise there is a bit of stuffing round needed.
_____

[olllllo]
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Swaping instrument clusters / compatability

Post by BlueSuzy »

mrRocky wrote:Just wondering if i can swap my instrument cluster which has no tacho with one that does and if so what wire do i need to connect up to make the tacho work. am i correct in assuming the other gauges will work with just plugging in the standard plugs on my car.
I have a baleno 1st gen motor with 1 coil only so i realise there is a bit of stuffing round needed.
The 1 coil baleno motor should work with a stock sierra tacho.

Its the twin coil motors that you stuff around with.

The sierra should have wiring for a tacho already in the loom.? Just not in the guages..
I am Tim
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

ok will attempt 2moro
_____

[olllllo]
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: Swaping instrument clusters / compatability

Post by greg »

BlueSuzy wrote: The sierra should have wiring for a tacho already in the loom.? Just not in the guages..
You might need to plug into the brown wire that comes out of the loom next to the sierra coil.... that's the tacho signal wire.
DMA Founding Member #1 - Now Retired
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

As others have said, you should be able to use a standard sierra tacho as its still a 4cyl engine with dizzy.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 88 guests